Candy Freezer Compartment Door Hinge Kit

Stock Number: ES544567

Manufactured by Candy

In Stock Available for immediate despatch

Rated 4.3 out of 5 (24 customer reviews)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Description

Freezer Compartment Door Hinge Kit

Freezer compartment door loose or coming off? In need of a new door hinges to help you out? No problem, eSpares could have just what you need. This genuine spare door hinge kit can easily get your old compartment door looking and performing like new. You'll be keeping food frozen effortlessly in no time!
 
Genuine spare part suitable for select models of Candy, Hoover and many more brands of refrigerators.
 
Please check the list of suitable models to ensure that this spare part will fit your appliance.

More product images

Product Reviews

Rated 4.3 out of 5 (24 customer reviews)
Write a review
  • Could be better

    • 4.0 out of 5
    • 3.0 out of 5
    • 5.0 out of 5
    • 3.0 out of 5

    By - Surrey

    Both hinges supplied, only one required as only one broken therefor one no use to me. Had the cost been halved it and only one supplied it would have been more sensible.
  • excellent

    • 5.0 out of 5
    • 5.0 out of 5
    • 3.0 out of 5
    • 3.0 out of 5

    By - shenfield

    these parts were excellent value. The original order arrived but the package contained two left hand side brackets. A quick telephone call to espares and the correct parts (one left side fitting and one right side fitting) were despatched and arrived the following day. An email arrived with full instructions on how to return the unwanted parts together with a returns label to print off and at no cost. The parts were easy to fit but following a suggestion from an earlier review I fitted the right hand side fitting to the freezer first then slotted the flap fittings into the appropriate slots then eased the left hand side fitting with the flap attached into the appropriate slots on the freezer and bingo. Care must be taken not to stress the supports as they will probably break as they are quite fragile. Good luck.
  • A fragile part!

    • 4.0 out of 5
    • 4.0 out of 5
    • 2.0 out of 5
    • 4.0 out of 5

    By - West Midlands

    This fragile part is definately the achilles heel of this freezer! The bottom part of the right hand support is very weak because the plastic is far too thin by design. Each part consists of two barbed fittings with a white plastic rod that fits down the middle to push the barbs out and secure the support to the side of the fridge. It's a bit tricky to get the old rods out but I found the point of a small penknife did the trick. I found the best way to fit the right hand part was to hook the plastic flap into the left hand side support, then fit the right hand side on the other end of the flap and then push back into place and secure the part by pushing the rods in! I broke the first set I bought during fitting and had to buy another set - hopefully you will have more luck!

Ask & Answer

(1 Question and 1 Answer) Ask a question
  • Q I have an integrates fridge with freezer compartment, and cannot find the model or make of the appliance. WOuld this suit? or can you help? 1 Answer

    By Anonymous - glasgow - 12 January 2009

    • A
      Hi Watos Same as before I'm afraid. Without a model number I can't help you. Maybe if you could have one last double check for it? For help finding your model number, refer to our handy guide: http://www.espares.co.uk/findingmodelnumbers.aspx

      By Rory eSpares Staff - 21 January 2009