Get The App From Play Store!

Skip to main content

Washing Machine Door Seal Stock Number: ES544297

Genuine spare part for select Hotpoint and Indesit washing machines

Read more

Manufactured by Hotpoint

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Washing Machine Door Seal

If you are noticing that there is water coming from the door of your washing machine during or after the wash cycle, it could be due to a faulty door seal. With this replacement door seal from eSpares, you can get back to having the confidence in putting the washing on and not ending up with flooded floor!

Spare part for select models of Hotpoint, Indesit, and Scholtes washing machines.

Please check the list of suitable models to ensure that this is the correct part for your appliance.

Please note this part does not include the outer and inner clamp. 

Ask a Question

10 Questions and 11 Answers

Our inner retaining spring band has warped so needs replaced. Just trying to source a replacement part!

By CC - Scotland - 24 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    The inner clamp band to the drum for your machine is Stock Number: ES657529 and is not supplied with the door seal. The outer clamp band is Stock Number: ES831870

  • Thanks Chris, Tur clamp band on the outside of the door seal is ok, but the inner spring-like band has come off and is warped from rattling around indside the drum and no longer holds the seal in place. This is the bit we'd need to replace (together with the actual door seal). Do you think they're easy to find as I can't see one available from ESpares. Thank you. By CC - Scotland - 24 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    The clamp band for your machine is Stock Number: ES657529 and is not supplied with the door seal.

Answer this question
By Iain011 - - 16 January 2010
  • There are two small drain holes, to prevent sitting water in the rubber ring. If you position, the moulded rubber part at the top, then the drain holes will be at the bottom, where they are supposed to be By Martyn79 - Castleford - 21 September 2010
  • yes By oscar2007 - Wakefield West Yorkshire - 25 January 2010
Answer this question

Watched your video to change rubber seal but cannot get front panel off as is welded not screwed. Can you help please

By Michele - Surrey - 05 February 2016
  • Chris from eSpares
    Chris at eSpares says...

    For information on your repair on a similar machine see our video:How to replace an Indesit washing machine door seal: www.espares.co.uk/advice/7/2305/

Answer this question

I have an Integrated Indesit Washing Machine. It would be really hard to take the machine out of the kitchen unit to remove any top or front -can I replace the seal by just removing the door? Also- do I need to also buy the circular fixings or can I reuse the old ones?

By Jacqueline - Kent - 29 May 2015
  • Chris from eSpares
    Chris at eSpares says...

    For information on this type of repair see our video: How to replace an Indesit washing machine door seal. http://www.espares.co.uk/advice/7/2305

Answer this question

but the old seal does not have the rubber protrusion shown on the inner edge of the picture of this seal on the website. Did Oddjob have any problems after fitting the seal. the back face of the old seal is flat whereas the new one is ribbed.

By steve - Leicestershire - 25 March 2014
  • Chris from eSpares
    Chris at eSpares says...

    As long as the seal fits and the drain holes are in the correct place then the extra protrusion is not a problem. Manufacturers will sometimes change a part in production and this lip is designed to help washing to keep away from the drum edge and nost rub the seal on spin.

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

Washing Machine Door Seal

£62.61
(inc. VAT)
£62.61