Karcher Replacement High Pressure Hose & Hand Gun - 12m

Stock Number: ES538245

Manufactured by Karcher

In Stock Available for immediate despatch

Rated 4.7 out of 5 (25 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance? [?]

This product is compatible with:

  • Karcher Domestic K2 Series Pressure Washers that have a C clip fitting on the hand gun
  • Karcher Domestic K3 Series Pressure Washers that have a C clip fitting on the hand gun
  • Karcher Domestic K4 Series Pressure Washers that have a C clip fitting on the hand gun
  • Karcher Domestic K5 Series Pressure Washers that have a C clip fitting on the hand gun
  • Karcher Domestic K6 Series Pressure Washers that have a C clip fitting on the hand gun
  • Karcher Domestic K7 Series Pressure Washers that have a C clip fitting on the hand gun

Click on your brand to check other appliances this part fits

Karcher Pressure Washers

Description

Replacement High Pressure Hose & Hand Gun - 12m

Have you been using a split, taped up hose to run your pressure washer? Keep your washer's performance optimised by swapping your damaged hose for this new one. It's an easy fix to revive your pressure washer.

The accessory kit enables retrofitting of the practical Quick Connect and is suitable for most Karcher pressure cleaners manufactured since 1992. The Quick Connect system guarantees quick and simple disconnection of the high-pressure hose from the device and gun. 

Specification:

  • Hose length: 12 metres
  • Hand Gun
  • Maximum pressure: 160 bar
  • Maximum temperature: 60°C
  • 16 MPa

Important Information:

Please note: Ensure that you have checked the suitable model fit list compatibility, and refer to the various 8 digit numbers that are displayed once you have searched for and then clicked your model. It is important that the 8 digit number reference (Beginning 1) is stated.

Please note: For model KB4040 - due to modifications, you will also need to obtain the following hose connector here

Not suitable for hose drum units.

Genuine replacement hose suitable for select models of Karcher K2-K7 series pressure washers - where there is a C-clip fitting on the hand gun.

Please check the suitable model fit list, and the information above, to ensure that this is the correct hose for your appliance.

karcher spares reference: 2.642-953.0

How to replace a Karcher hose and handgun

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

Product Reviews

Rated 4.7 out of 5 (25 customers)
Write a review
  • Good Upgrade

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 4.0 out of 5

    By - Ireland

    I bought this to replace the original hose on the KB4040 which had burst. It is worthwhile going for 12m as it gives good flexibility when working at heights etc. This is also an upgrade to quick release so make sure to buy the recommended outlet if you have the KB4040 as this is needed to connect the quick release coupling to the machine. The hose is superior quality to the original but I find it better to store separate to the machine to avoid kinks etc. Overall this was a good upgrade.
  • Good purchase

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 3.0 out of 5

    By - northallerton northyorkshire

    I am very pleased with my purchase first class service and works a treat i will use espares in the future for anything i need EXELENT
  • Good fit and more length

    • 4.0 out of 5
    • 4.0 out of 5
    • 4.0 out of 5
    • 3.0 out of 5

    By

    New 12m hose for my Karcher K6, just fits in the integral reel and gives me more scope around my drive and car.

Ask & Answer

(4 Questions and 4 Answers) Ask a question
  • Q hose and gun fit 1 Answer

    I have an old Karcher K6.85m model 1.397-502 number 014844 which has an integral hose which I have removed Can you please tell me which hose fits and can I fit a connector which would enable the fitting of more modern hose like clip in model Many thanks David

    By david vance - belfast - 24 April 2016

    • A
      Because of the design of your washer if you remove the outlet adapter you may have to remove the case to fit the hose. If you keep the brass 'swivel' from the centre of the hose reel you can remove the hose by just pulling off the spring clip. We think Stock Number: ES1634146 will connect from the brass connector to your gun.

      By Chris eSpares Staff - 25 April 2016

  • Q why am i having to replace the c clip almost every time i use the pressure washer with a new one. 1 Answer

    By Pat Lewis - United Kingdom - 29 March 2015

    • A
      The clip that holds the hose on the gun must be pushed fully home and is normally left connected when not in use.

      By Chris eSpares Staff - 30 March 2015

  • Q I have two hoses from your K4 series can I put them together to make one longer hose 1 Answer

    By bazza - Birmingham - 09 November 2013

    • A
      we think part Stock Number: ES1387718 will connect to one 'gun' after removing the spray head and allow another hose to connect onto it.

      By Christopher eSpares Staff - 11 November 2013

  • Q Can I use this hose on a Karcher K6.5 1 Answer

    By Nav1 - 11 April 2009

    • A
      Hi Nav1, I'll need your model's seven digit production number, found on the silver plate of your machine to find you the right hose.

      By Rory eSpares Staff - 03 June 2009