All Karcher HD 110V Units (Commercial) Pressure Washers, Karcher HD Compact Class (Commercial) Pressure Washers, Karcher HD Medium Class (Commercial) Pressure Washers, Karcher HD Special Purpose (Commercial) Pressure Washers, Karcher HD Stationary Washers (Commercial) Pressure Washers, Karcher HD Super Class (Commercial) Pressure Washers, Karcher HD with Combustion Engine (Commercial) Pressure Washers, Karcher HDS Compact Class (Commercial) Pressure Washers, Karcher HDS Emission Free (Commercial) Pressure Washers, Karcher HDS Medium Class (Commercial) Pressure Washers, Karcher HDS Stationary Washers (Commercial) Pressure Washers, Karcher HDS Super Class (Commercial) Pressure Washers and Karcher HDS with Combustion Engine (Commercial) Pressure Washers and the models listed below.
Click on your brand to see the model numbers this part fits.
Genuine spare part to fit your Karcher pressure washer. This replacement seal fits between the high pressure hose and the pressure washer body. Prior to ordering, please check the list of appliances to ensure these seals are right for you.
Other part numbers for this item: 28802960, 4002667019957, 6.362-957.0, 63629570
Needed these O Rings quickly in order to pressure wash driveway and patio. Quickly found E Spares web site. Placed order and they were received as promised within a 2 day delivery slot. Easy to fit, completed my job, no leaks 100%. Good customer service.
wrong parts25 April 2013
1.0 out of 5
1.0 out of 5
2.0 out of 5
2.0 out of 5
By shrek
Gave them the model number and what I needed and sent the wrong ones out plus charge me 12 when I found later they are 3 for the same item elsewhere
Does what it says on the expensive tin23 April 2013
3.0 out of 5
5.0 out of 5
5.0 out of 5
1.0 out of 5
By saintlyboy- Letchworth Garden City
Not much you can say about 5 rubber washers - they fit, they work and overall happy with service.
A tenner delivered for 5 tiny bits of rubber is however rather steep.
hi can you tell me if this is a fault that is related to pump seals. my kb4040 will not auto stop when the trigger is released it carries on shunting if you know what i mean?would a seal kit fix it or is it something more serious. the machine is 2 years old so i was not thinking of replacing it just yet,if this is a seal problem will i have to strip the machine completely to gain access. any help is apprieciated also will the above kit be ok
By slippysam- scotland
- 07 May 2009
A
Hi Slippysam, check out our pressure washer help guide for tips and videos: http://www.espares.co.uk/advice/pressure-washers/a/8
By Rory
- 11 February 2010
A
Sounds like you have the same problem as me. Yes, a new seal on the high pressure output should do the trick. Not necessary to strip down m/c. I have to replace mine each spring and I have come to the conclusion that frost may have got into the works. The 'shunting' you refer to is the m/c trying to maintain pressure in the high pressure hose.
Hope this helps. Pack of 5 'O' rings should last you a few years, but keep the m/c away from frost.
John
QI have a Karcher 6.85, and it leaks water from underneath the machine, it started doing it one day when I was pressure washing my drive.Does this sound like a washer seal has gone?1 Answer
By doyzone- England
- 02 April 2011
A
Hi doyzone, it could well be a seal that has gone, but it could also be a crack in one of the inlet or outlet covers. I'd advise opening up the washer and taking a look inside, checking all components for signs of damage, cracks or wear and tear.
Your basket is empty.
enlarge image
- 11 February 2010