Vacuum Cleaner Drive Belt - Pack of 2 Stock Number: ES509750
Genuine spare part for select models of Dyson vacuum cleaners
Manufactured by Dyson
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Vacuum Cleaner Drive Belt - Pack of 2
If your vacuum cleaner has stopped picking up dirt like it should, the drive belt may have snapped. The drive belt helps to turn the agitator brush in your vacuum, which beats dirt and dust out of your carpets. If this is the case, eSpares has just the solution you need. Check out these genuine Dyson drive belts, which will get your vacuum cleaner back to 100% so your carpets will be spotless again in no time at all!
Specification:
- Includes 2 x belts
- Type: Motor
- Made from specially developed rubber compound for increased belt life
- Inner Diameter: 90mm
- Length 300mm
- Width 12mm
- Includes fitting instructions
Prior to ordering, please check the list of appliances to ensure this is the right part for your model.
Need more Dyson parts? Check out or complete selection of Dyson spares. If you're looking for a lower cost alternative, try these compatible parts.
Dyson spares reference: 0222002F
6 Questions and 8 Answers
I'm after a belt to fit from the clutch to the brush belt. I understand this is different from the motor to clutch belt so I was wondering which belts are included?
- There is only one belt on a dyson vac so if you buy the 2 in a pack set you will always have a spare
- There are two clutch to brush bar belts in the pack.
- I find it easier to use a piece of strong thick string to pull the belt back and over, use thick string because thin stuff can cut the belt..
- With difficulty, a tapered handled screwdriver and a resolve to fix it even though my eighty some years old fingers didn't enjoy the process.
-
Chris at eSpares says...
There is a clutch 'knob' on the left of the base that when lifted to the park position rotates and stops the brushes. If this is in the off position the brushes do not engage when lowered. If this knob turns correctly then the clutch belt may have failed from the motor to the clutch unit.
Not sure if I need a special screwdriver to get at the drive belt.
-
Chris at eSpares says...
You do not generally need any special tools to replace the belt. To dismantle the machine the only special tool needed is a long torx screwdriver like in this kit Stock Number: ES1251179
I have the DC07 all floors that needs two belts, does this pack do the clutch and the motor belt. 1 Answer
-
Rory at eSpares says...
Hi Sandi, this is a pack of 2 drive, or motor, belts. The clutch belt is this one: http://www.espares.co.uk/part/dyson/dc07-all-floors/p/1086/716/6/420506/188716/vacuum-cleaner-clutch-bel.html?ms=902514-01
Will this part fit my appliance?
Check Now