T-300 Patio Cleaner Attachment Stock Number: ES507807
Can be attached to any Kärcher domestic pressure washer that has the bayonet style attachment to the trigger gun. Predominantly a patio-cleaning device that can be used on fencing, garage doors and a number of different surfaces
Manufactured by Karcher
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Will this part fit my Appliance?
This product is compatible with:
- Karcher Domestic K2 Series Pressure Washers
- Karcher Domestic K3 Series Pressure Washers
- Karcher Domestic K4 Series Pressure Washers
- Karcher Domestic K5 Series Pressure Washers
- Karcher Domestic K6 Series Pressure Washers
- Karcher Domestic K7 Series Pressure Washers
T-300 Patio Cleaner Attachment
Can be attached to any Kärcher domestic pressure washer that has the bayonet style attachment to the trigger gun. Predominantly a patio-cleaning device that can be used on fencing, garage doors and a number of different surfaces.
It has two dirtblasting nozzles on opposite ends of a propeller attached inside the outer casing. When the high pressure water is blasted through the lance and propeller, a hovercraft effect is created that cleans the whole patio in a tornado effect.
It reduces the cleaning task by five times thus decreasing motor wear, water usage and time spent cleaning. The cleaning nozzles are height adjustable to cater for different floor or wall surfaces. Finally the outer casing protects from splash back, which stops irritating dirt being spread around your home.
Specification:
- Two dirtblasting nozzles
- Hovercraft effect
- Cleaning splash back protection
- For wooden decking, patio flooring, tiles and concrete
- Five times faster than regular spray lances
- Working diameter of 265mm
This attachment is suitable for all domestic pressure washers in the K2-K7 series.
Karcher Spares Reference: 2.640-212.0
29 Questions and 29 Answers
The water pressure through the jets is ok but the arm has stopped spinning Can you advise
-
Chris at eSpares says...
It is likely that either the spindle and bearings Stock Number: ES952758 are worn or the spray arm itself.
The patio cleaner has two silver pipes with it one of which should fit into the bayonet fitting. It doesn't get in with sufficient depth to twist the handle to hold firm. The protecting shroud on the second pipe is what is the problem. Can it be adjusted in some way? I'd appreciate any advice you can give.
-
Chris at eSpares says...
If the locking shroud will not allow fitment to your gun you may have to replace the gun assembly.
-
Chris at eSpares says...
This is suitable for the Karcher KB5050 pressure washer.
SN 780949.
-
Chris at eSpares says...
This will fit any Karcher 'trigger unit' provided it has a standard Karcher bayonet fitting.
Will this part fit my appliance?
Check Now
