Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Zanussi Freezer Drawer Front Stock Number: ES501547

Zanussi Freezer Drawer Front - ES501547

4.5 out of 5 Rated 4.5 out of 5(18 customers)

Genuine spare part for select AEG, Alno, Arthur Martin, Castor, Domoline, Electrolux, Faure, Juno, Lloyds, Marijnen, Privileg, Rex, Tricity Bendix, Zanussi and Zoppas freezers

Read more

Manufactured by Electrolux

(This part fits select Zanussi models)

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Freezer Drawer Front

This replacement compartment front is a genuine part and will fit select models of AEG, Alno, Arthur Martin, Castor, Domoline, Electrolux, Faure, Juno, Lloyds, Marijnen, Privileg, Rex, Tricity Bendix, Zanussi and Zoppas freezers.

  • Height: 223mm
  • Width: 422mm

Ensure this part will fit your freezer by checking the list of appliances and the measurements before purchase.

Write a review

Here’s what other people are saying about Zanussi Freezer Drawer Front.

(18 reviews)

4.5 out of 5

Ease of fitting 4 out of 5
Quality 5 out of 5
Value 3 out of 5
  • Stockton-on-Tees
    5.0 out of 5

    Lovely new drawer fronts!

    I struggled on with broken old drawers until I thought about espares- was amazed to find compatible drawer fronts for my old freezer! They were very easy to fit and it looks like a brand new appliance!

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
  • end of M2 Kent
    5.0 out of 5

    Better than the original

    Customer services were so helpful in finding a replacement drawer front for my discontinued original. The new one was clear, whilst the old one was white, but clear is much better! Fitting the part and installing the drawer took about 30 seconds. Thanks again for great service.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • 4.0 out of 5

    freezer drawer front

    obviously a universal product. This is clear plastic replacing a white one. Rather pricey for a piece of moulded plastic, and slightly awkward to fit, but it seems slightly stronger than the item it replaced.

    Quality 5.0 out of 5
    Value 2.0 out of 5
    Ease of fitting 3.0 out of 5
See all reviews
Ask a Question

6 Questions and 6 Answers

Hi, I have a Zanussi Freezone, Fridge/Freezer. The door fronts on the Freezer doors (2) have snaped. I need to know the size of these draws so I can order them. I measured mine and they are both the same size, which is: 16.5 inches long x 9ish inches depth. Will yours fit mine? I really need to order 2 ASAP. Thank You for your help Sarah xx

By puppyjay - Tyne and Wear - 25 August 2010
  • Rory from eSpares
    Rory at eSpares says...

    Hi Sarah, this drawer front is 222mm high, which is about 8.75 inches, and is 420cm wide, which is 16.5 inches, so this part is the size you're after. I couldn't 100& guarantee it'd fit your fridge freezer without knowing its model number though. If your model is listed in the Model This Part Fits section above, this is the drawer front for you.

Answer this question

i have a fridge freezeer ZFK47/52RF i am looking for the panels on the front of the baskets are these the same

By titchmanb - - 13 June 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Titchmanb, I'm afraid we don't stock drawer fronts for the ZFK47/52RF; they are unavailable due to the age of the appliance. Sorry I can't be of any more help.

Answer this question

Hi, I have an old tricity bendix fridge freezer with 3 x same size freezer compartments, 2 x baskets same size and the drop down door at top. I need a replacement basket front for middle draw. No model number on fridge freezer but the dimensions are 50cm w x 61cm d x 163cm h. The upper/lower drawer front pic looks the one, dimensions of basket front is 39cm w x 21cm h. The front has the 2 round lugs on either side at bottom

By izoglet - - 20 April 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Izoglet, I'm afraid without your model number I can't find the right parts for it. Would it be possible for you to get back to me with it? For help finding it, use our guide: http://www.espares.co.uk/advice/fridges-and-freezers/a/2/282/finding-your-fridge-or-freezer-model-number.html

Answer this question

I have a Zanussi Freezone ZFC-61/27 and I have broken the front panel of the top drawer in the freezer is this the correct item for me?

By zanussifreezone - - 07 March 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Charlotte2, the drawer front you are after is this one: http://www.espares.co.uk/part/fridges-and-freezers/electrolux/p/1084/15/0/0/1079345/drawer-front.html

Answer this question

2 1 Answer

I need a front for my freezer first pull down and a front for my middle basket for Zanussi zxc78/31 925690610 please help me.

By charlotte2 - - 05 February 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Charlotte2, the drawer front for the top drawer is this one: http://www.espares.co.uk/part/fridges-and-freezers/electrolux/p/1084/15/0/0/586774/blind-trust-drawer-printe.html and for the bottom two drawers is this one: http://www.espares.co.uk/part/fridges-and-freezers/electrolux/p/1084/15/0/0/584003/front-panel.html

Answer this question
See all questions and answers
Please contact us as we may be able to find you a suitable replacement.