Universal 3-Sided Oven Door Seal Kit

Stock Number: ES486644

In Stock Available for immediate despatch

Rated 4.3 out of 5 (130 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance?

This product is compatible with:

  • Cookers & Hobs that meet the criteria in the description (see the video too)


Universal 3-Sided Oven Door Seal Kit

This universal door seal is designed to fit most modern ovens that have a three sided seal. The seal attaches to the body of the oven by a single hook in each corner.

Please make sure that there is a single hole in each corner of your oven. This will not fit ovens that have two holes in each corner.

Oven Door Seal Holes

The kit includes a 1.5m length of black door seal that you cut to the right size for your oven, plus 2 corner and 2 straight hooks to attach the seal to the body. Comes with full fitting instructions.

To fit the new seal:

  1. Measure the distance between the holes
  2. Cut the top and sides of the seal to size
  3. Trim the corners to 45° on the top seal and at the top section only of the side seal. Leave the bottom section of the side seal at 90°
  4. Insert the barbed corner hooks into the slot of the seal at the top corners
  5. Insert the barbed straight hook into the slot of the seal at the bottom of the sides
  6. Clip the corner hooks into the top holes and the straight hooks into the bottom holes on the face of the oven

Where possible we would recommend that you order a branded/genuine door seal for your cooker. To find out if we carry the door seal for your oven please enter your oven model number in the search box above.

How to replace an oven door seal

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.3 out of 5 (130 customers)
Write a review
  • easy to fit

    • 3.0 out of 5
    • 3.0 out of 5
    • 3.0 out of 5
    • 4.0 out of 5

    By - uk

    product was fair value for money easy to fit, the only down side with product is that it does not stick to the lining of the grill/oven, so it hangs down slightly, making it look unfinished.
  • very good produce.

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Plymouth

    well packaged, the seal is better than the original and the instructions very easy to follow.
  • excellent, speedy service from espares

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - co. durham

    My outdated oven ceased manufacture and spares were unavailable so I took a chance and ordered a universal seal. It was extremely easy to fit but the oven door did not close properly. However, with the aid of a craft knife, I managed to reduce the depth of the seal and the door now closes correctly. This has saved me the expense of having to buy a new oven.

Ask & Answer

(8 Questions and 9 Answers) Ask a question
  • Q my control knobs on my belling 335wh oven keep on melting and going soft! should I replace then oven door seal ? 2 Answers

    By andy1976 - 20 March 2011

    • A
      Sounds like your oven cooling fan is not working

      By Keith - Newcastle Upon Tyne - 14 June 2012

    • A
      Hi andy1976, it sounds as if heat is escaping from the top oven, causing the control knobs to melt. A damaged door seal is the most common reason for this happening. Check out the video on this page for help fitting the door seal.

      By Rory eSpares Staff - 21 March 2011

  • Q Can this type of oven door seal be adapted to fit a Bosch EB 600 HW 1 Answer

    The existing lower oven is around 33 years old and is goalpost design with rounded corners attached with clips?

    By Anne Cairns - N. Ireland - 28 March 2015

    • A
      The clips supplied with this kit will give 'square' corners but it should be possible to use this kit.

      By Chris eSpares Staff - 30 March 2015

  • Q Do I need to use a heat resistant sealant also as the seal will actually be fitted on the door not the oven surround. 1 Answer

    there would be quite a gap between the hooks and the original seal was stuck down as well as hooked. My cooker is a Leisure Bistro 55 ng 5767.

    By Suzy J - swansea - 23 November 2014

    • A
      The seal should not be stuck down just held taught by trimming a little shorter than the actual length and stretching into position.

      By Chris eSpares Staff - 24 November 2014

  • Q is hotpoint a three sided door seal 1 Answer

    By gary - belfast - 03 October 2014

    • A
      In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

      By Chris eSpares Staff - 03 October 2014

  • Q will this fit a bs2460ss baumatic oven. 1 Answer

    Its a double oven size in one.

    By kel - 02 October 2014

    • A
      Universal parts can be used on many Appliances but may fit slightly differently to the original. Where possible we recommend using the original part unless you have checked the dimensions match and can make minor modifications if required.

      By Chris eSpares Staff - 03 October 2014