Cookers & Hobs
that meet the criteria in the description (see the video too)
Universal 3-Sided Oven Door Seal Kit
This universal door seal is designed to fit most modern ovens that have a three sided seal. The seal attaches to the body of the oven by a single hook in each corner.
Please make sure that there is a single hole in each corner of your oven. This will not fit ovens that have two holes in each corner.
The kit includes a 1.5m length of black door seal that you cut to the right size for your oven, plus 2 corner and 2 straight hooks to attach the seal to the body. Comes with full fitting instructions.
To fit the new seal:
Measure the distance between the holes
Cut the top and sides of the seal to size
Trim the corners to 45° on the top seal and at the top section only of the side seal. Leave the bottom section of the side seal at 90°
Insert the barbed corner hooks into the slot of the seal at the top corners
Insert the barbed straight hook into the slot of the seal at the bottom of the sides
Clip the corner hooks into the top holes and the straight hooks into the bottom holes on the face of the oven
Where possible we would recommend that you order a branded/genuine door seal for your cooker. To find out if we carry the door seal for your oven please enter your oven model number in the search box above.
How to replace an oven door seal
This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.
Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.
Qmy control knobs on my belling 335wh oven keep on melting and going soft! should I replace then oven door seal ?2 Answers
- 20 March 2011
Sounds like your oven cooling fan is not working
By Keith- Newcastle Upon Tyne
- 14 June 2012
Hi andy1976, it sounds as if heat is escaping from the top oven, causing the control knobs to melt. A damaged door seal is the most common reason for this happening. Check out the video on this page for help fitting the door seal.
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Universal parts can be used on many Appliances but may fit slightly differently to the original. Where possible we recommend using the original part unless you have checked the dimensions match and can make minor modifications if required.
QCan a universal seal kit be slided in to place as on my stoves 050551109.?The seal on my oven has no clips?1 Answer
The seal on my top & main oven has no clips and the seal just slides into place as described in the maintenance book that came with oven.It says it can be replaced by sliding a new one in then trim to size. Will this unversal kit work?
By Jacko- Kent
- 20 February 2014
It may be possible to modify your oven to accept this seal but I would only recommend this if you cannot obtain the original part. The oven has been designed to use the original seal and therefore is likely to work as good as possible with that part, this may not be the case with an alternative.