Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Universal 3-Sided Oven Door Seal Kit - 1.5m Stock Number: ES486644

Universal 3-Sided Oven Door Seal Kit - 1.5m - ES486644
View video

4.3 out of 5 Rated 4.3 out of 5(147 customers)

Goal post design cut to size door seal suitable for most traditional ovens (natural convection)

Read more

Will this part fit my Appliance?

This product is compatible with:

  • Cookers & Hobs - That Match The Criteria In The Description (See The Video Too)

Universal 3-Sided Oven Door Seal Kit - 1.5m

This universal door seal is designed to fit most modern ovens that have a three sided seal. The seal attaches to the body of the oven by a single hook in each corner.

Please make sure that there is a single hole in each corner of your oven. This will not fit ovens that have two holes in each corner.

Oven Door Seal Holes

The kit includes a 1.5m length of black door seal that you cut to the right size for your oven, plus 2 corner and 2 straight hooks to attach the seal to the body. Comes with full fitting instructions.

PLEASE NOTE: Not suitable for ovens with curved corners or more than one hole in each corner.

To fit the new seal:

  1. Measure the distance between the holes
  2. Cut the top and sides of the seal to size
  3. Trim the joints to 45°, leave the bottom end of the side seal at 90°
  4. Insert the barbed corner hooks into the slot of the seal at the top corners
  5. Insert the barbed straight hook into the slot of the seal at the bottom of the sides
  6. Clip the corner hooks into the top holes and the straight hooks into the bottom holes on the face of the oven


  • Colour: Black
  • Silicon
  • Length: 1.5m
  • Depth: 10mm
  • Includes 2 corner brackets and end clips

Where possible we would recommend that you order a branded/genuine door seal for your cooker. To find out if we carry the door seal for your oven please enter your oven model number in the search box above.


Write a review

Here’s what other people are saying about Universal 3-Sided Oven Door Seal Kit - 1.5m.

(147 reviews)

4.3 out of 5

Ease of fitting 4 out of 5
Quality 5 out of 5
Value 4 out of 5
  • Enfield
    5.0 out of 5

    Why didnt I get it sooner!

    very easy to cut and fit - instructions are very clear - only down side is - cutting the 45 degree angle took a bit of doing so be careful there and when you first turn your oven on after fitting it smells a bit funky!

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Cumbria
    5.0 out of 5

    Great site to deal with

    Found this web site through google found the site easy to use located the part I needed without any problem Cost of the item very competitive and payment method and delivery excellent Would recommend spares to friends Many thanks

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Banstead
    4.0 out of 5

    a good product,easy to fit and cut to size

    A good product, which came in one length, but was easy to cut to size. Very accurate instructions easy to follow.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
See all reviews
Ask a Question

8 Questions and 9 Answers

By andy1976 - - 20 March 2011
  • Sounds like your oven cooling fan is not working By Keith - Newcastle Upon Tyne - 14 June 2012
  • Rory from eSpares
    Rory at eSpares says...

    Hi andy1976, it sounds as if heat is escaping from the top oven, causing the control knobs to melt. A damaged door seal is the most common reason for this happening. Check out the video on this page for help fitting the door seal.

Answer this question

The existing lower oven is around 33 years old and is goalpost design with rounded corners attached with clips?

By Anne Cairns - N. Ireland - 28 March 2015
  • Chris from eSpares
    Chris at eSpares says...

    The clips supplied with this kit will give 'square' corners but it should be possible to use this kit.

Answer this question

there would be quite a gap between the hooks and the original seal was stuck down as well as hooked. My cooker is a Leisure Bistro 55 ng 5767.

By Suzy J - swansea - 23 November 2014
  • Chris from eSpares
    Chris at eSpares says...

    The seal should not be stuck down just held taught by trimming a little shorter than the actual length and stretching into position.

Answer this question
By gary - belfast - 03 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: Alternatively please copy and paste this link into your web browser.

Answer this question

Its a double oven size in one.

By kel - - 02 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    Universal parts can be used on many Appliances but may fit slightly differently to the original. Where possible we recommend using the original part unless you have checked the dimensions match and can make minor modifications if required.

Answer this question
See all questions and answers
Order within 9PM for UK Next Day Delivery