Bosch Dishwasher Detergent Dispenser Assembly

Stock Number: ES481643

Manufactured by Bosch

In Stock Available for immediate despatch

Rated 4.5 out of 5 (95 customer reviews)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Description

This detergent dispenser is a genuine part and will easily fit select models of Bosch, Neff and Siemens dishwasher. Please check the list of appliances prior to ordering to ensure this is the right part for you.

Detergent Dispenser fitting tip:

  1. Unplug from mains
  2. Remove stainless steel cover with torx screw driver, leave the two larger screws each side that hold the hinges in place.
  3. There is a cable tidy which is attached to the inside of the dispenser - remove carefully
  4. Unplug the connectors to the old dispenser then carefully cut the top plastic lugs off the old dispenser and it will come away easily. Beware the stainless steel edges are sharp.
  5. Replacement is a reversal of the removal. Press the new dispenser in firmly as it must 'click' into place to be secured by the stainless steel lugs.

This tip was left by Kassy from Essex.

How to replace a dishwasher detergent dispenser

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.5 out of 5 (95 customer reviews)
Write a review
  • saved having to buy a new machine

    • 5.0 out of 5
    • 4.0 out of 5
    • 5.0 out of 5
    • 4.0 out of 5

    By - Notts

    I was pleasantly surprised to see that the part was available and very impressed with the video showing how to fit it. I had great difficulty fitting the new unit as it didn't want to click home due to it being a very tight fit. I then had a flash of inspiration and swapped the rubber seal for the one off the old unit. As this had been compressed over the years it fitted just nicely. The dishwasher is now good as new.
  • good quality product

    • 5.0 out of 5
    • 3.0 out of 5
    • 4.0 out of 5
    • 4.0 out of 5

    By

    As this is a replacement for a broken item I found the website most helpful in finding the right product, and the fitting instructions were excellent. However it was necessary to modify the retaining plates on the dishwasher to enable the dispenser to fully click into position. The dishwasher is now working perfectly.
  • Fantastic service

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Wiltshire

    I ordered the item on a Sunday and fitted ii when I got home from work Monday evening! Great service well done and I highly recommend espares Regards Johnnie

Ask & Answer

(5 Questions and 5 Answers) Ask a question
  • Q Bosch SHU5316GB/08 1 Answer

    Are there any "first check the" items you may be able suggest to get to the bottom of why my Bosch dishwasher does everything except get hot? Seems as though the water is not heating at all, just wondered whether you could suggest a first instance.... go to....very much appreciated. First rate espares service by the way....10/10

    By Dickie - Cheltenham - 02 April 2014

    • A
      For information on diagnosing this problem see our video: • http://www.espares.co.uk/advice/3/2083/how-to-diagnose-dishwasher-leaking-and-heating-problems

      By Chris eSpares Staff - 02 April 2014

  • Q Model SGV4313GB/17 need a replacement detergent dispenser. my door is timber , solidly fitted to the machine to match the kitchen units. Can I remove the inner panel of the unit to access the dispense? 1 Answer

    By fitzy - 22 November 2013

    • A
      Every integrated dish washer I have come across has the kitchen unit door fitted on the outer panel that has to be removed before removing the door panel. The inner liner is usually fitted to the hinges and is the last part of a door to be removed.

      By Chris eSpares Staff - 25 November 2013

  • Q DOOR REMOVAL FOR INTEGRATED MODEL 1 Answer

    MODEL SHV43A03GB/17 has an integrated door. Is door removal still as simple as shown on the video please?

    By JOHN - West Sussex - 22 October 2013

    • A
      There are a number of ways cabinet doors are attached to integrated machines, on dishwashers they generally have long wood screws that pass through the door 'edge' and sometimes once these are removed you may have to slide the door panel to disengage from the door.

      By Chris eSpares Staff - 23 October 2013

  • Q Slightly Different Connector 1 Answer

    Hi, I note you state that this item will fit into a Bosch SGS5358GB/17 but I have found that one of the connectors (the one near the rinse aid) is different to mine. Yours has a connector on the side whereas the one I am trying to replace has it near the other connector. Can you advise Many thanks in advance Chris

    By Wozzer - 23 July 2009

    • A
      Hi Chris. That is strange, In have the exact same model as you and this part was a direct swap for the old one. Perhaps your machine was a different batch? Are the connectors going to fit at all or are they physically different? I have attached a picture of the old (broken) assembly which was original on my machine to see if that helps you - is yours different?

      By Alex36 - Pinner, Middx - 17 October 2009

  • Q how does it work 1 Answer

    By sizer - aberdare - 13 November 2008

    • A
      Hi sizer. This part would replace your current Dispenser if it became damaged. It is not a stand-alone gadget. I'm afraid I don't know how they work though!

      By MikeH eSpares Staff - 14 November 2008