Straight to Hooked End 1.5m Drain Hose - 21mm outlets for 15790

Stock Number: ES479496

In Stock Available for immediate despatch

Rated 4.1 out of 5 (65 customer reviews)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance?

This product is compatible with:

  • Dishwashers with 21mm outlets
  • Washing Machines with 21mm outlets

Description

Drain hoses remove used water from your appliance, so if unpleasant odours are lingering or dirty water is running into your machine overnight, you may need to replace your drain hose. This spare is ideal for all dishwashers and washing machines with 21mm outlets.

  • Length: 1.5 metres
  • 21mm bore
  • 1x 90º end

Please note: Please measure the outlet connection on your appliance to ensure this "universal" part will fit, as different appliance models will use different sizes. If you need assistance finding the genuine part for your machine, please contact our Call Centre. We'll be happy to help.

Fitting tips (to be used as a guide only):

  1. Remember to disconnect from the power and water supply.
  2. Find the drain hose connection on your appliance and the drainage system it will connect to.
  3. You'll likely need to push your machine out from the wall to get at the back of the machine.
  4. Remove the damaged hose clamp. You may need to losen it with a screwdriver or pliers, depending on the type of clamp used.
  5. Remove the drain hose and replace it, or check it for damage/blockages if appropriate. Make sure it's attached securely to avoid leaks.

More product images

Product Reviews

Rated 4.1 out of 5 (65 customer reviews)
Write a review
  • Great Value

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By

    Easy to fit - does what it says. Solid manufacture. Good Value
  • Excellent

    • 4.0 out of 5
    • 1.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Somerset

    I had had a bit of a flood from my dishwasher in my newly fitted kitchen cupboard and needed to feel safe in running it again. I sent to Espares for a spare one, but the chap who fitted my kitchen fixed it so we have a spare for either washing machine or dishwasher. There was a card with a number to call should I need to fit it myself and need someone to hold my hand.
  • Replacement waste hose for Electrolux ESI 600 dishwasher

    • 4.0 out of 5
    • 1.0 out of 5
    • 4.0 out of 5
    • 4.0 out of 5

    By - Newcastle upon Tyne

    ESpares provided the part quickly and efficiently. The problems arose in trying to fit it. The dishwasher is some 15 years old but, apart from leaks in the waste pipe still works well. Unfortunately Electrolux were not able or were unwilling to provide information on fitting the new pipe. The join is enclosed within the machine. Eventually I succeeded by tipping the machine flat on it's front.Removing a corrugated plastic base plate by pushing out three rear plastic plugs, enabled the old pipe to be removed and the New one fitted. The dishwasher now works fine again.

Ask & Answer

(7 Questions and 7 Answers) Ask a question
  • Q Will this fit a Hoover pe235 front load washing machine? 1 Answer

    By Anonymous - 10 February 2014

    • A
      You will need to measure the diameter of the pump spigot to confirm this as we do not have this information to confirm.

      By Chris eSpares Staff - 10 February 2014

  • Q WILL THIS FIT A MACHINE WITH A 23MM o.d. OUTLET SPIGOT? 1 Answer

    I need a hose for Miele G692SCI PLUS-3 which has a measured 23mm O.D. outlet spigot. You don't list this exact model, but you list this hose as suitable for G692SC etc

    By jrk - Reading Berks - 06 February 2014

    • A
      The ends on these hoses can usually be stretched a couple of millimeters so we think it should be able to fit. However if you cannot we will of course (subject to our policy's) refund the part if not damaged.

      By Chris eSpares Staff - 07 February 2014

  • Q BOSCH DISHWASHER 1 Answer

    THE DRAIN HOSE OM MY DISHWASHER WAS DAMAGED ON INSTALLATION ie AND I HAD TO CUT OUT THE DAMAGED PORTION ABOUT 2 INCHES CAN YOU SUPPLY A CONNECTION PIECE AND CLIPS SO I CAN PUT BOTH BOTH ENDS TOGETHER AND ONCE AGAIN USE MY DISHWASHER.

    By JIMBO - GLASGOW - 08 January 2014

    • A
      If you search for 'drain hose connector' you will find a number of couplings but one word of caution. Some drain hoses are made of a plastic type of material with a spiral along its length, These can allow water to leak along this spiral and be difficult to seal effectively. If you have this type it would be easier to replace the drain hose completely.

      By Chris eSpares Staff - 09 January 2014

  • Q Are the ends rubber? 1 Answer

    I have to make an extension to my outlet from the machine. I therefore need to have the rubber ends to connect to the joining piece and the connection to the drainage system..

    By Anonymous - Exeter - 22 July 2011

    • A
      Yes both ends are rubber, fix to 22mm copper pipe with a jubilee type clip.

      By H - London - 17 October 2011

  • Q how to fit the outlet hose to the machine 1 Answer

    By ivy1 - 03 May 2010

    • A
      We unfortunately do not have a guide up for fitting this part at the moment. Hopefully we will do in the near future. If you are having difficulties fitting the part, please seek technical advice.

      By eSparesMalindi eSpares Staff - 22 June 2010