Skip to main content

Call eSpares 0844 9777 888 (7p per min + any network access charge)

Universal Vacuum Cleaner Floor Tool (30.5 - 37mm) Stock Number: ES478316

Main product image
View video

4.5 out of 5 Rated 4.5 out of 5(539 customers)

Floor tool with adaptor to fit 30.5mm to 37mm connections

Read more

Will this part fit my Appliance?

This product is compatible with:

  • Vacuum Cleaners - With Wands Of 30 to 37mm Diameter (Please See The Description And Video)

Universal Vacuum Cleaner Floor Tool 30.5 -37mm

This Universal Floor Tool is an eSpares top seller and works equally well on carpeting as it does on hard floors. Designed for maximum pick-up and fast removal.

Specification:

  • Large (270 x 87mm) for maximum pick-up of dust and dirt.
  • Adjustable hose fitting (30.5 to 37mm*) suitable for almost every make of vacuum cleaner (not Dyson). Adjust the fitting by tightening the black plastic screw cap on the threaded housing of the tool to create a smaller or larger connection and to tighten the extension tube in place.
  • Two swivel type buttons (brush out and brush in) on the top allow you to easily switch between brush out (normally used on hard floors) and brush in (normally used on carpets) depending on what you are using your vacuum tool for.
  • Supplied with screw fit collar and pip fitting collar.

Please Note: The size of 30.5 to 37mm refers to the size of the vacuum extension tube. To measure this, measure the outside diameter of the hose connected to your vacuum.

Important: Please ensure you check that the connection fitting size is suitable for your vacuum prior to purchase.

Write a review

Here’s what other people are saying about Universal Vacuum Cleaner Floor Tool (30.5 - 37mm).

(539 reviews)

4.5 out of 5

Ease of fitting 4 out of 5
Quality 4 out of 5
Value 4 out of 5
  • Leatherhead
    5.0 out of 5

    You get what you pay for, very good quality here with this item

    We looked at the choices on espares for a new head and there were a few cheaper options but on measuring the size of our hose we found it seemed to be in between sizes so this head negates that worry as it fits many sizes. We thought it a bit expensive compared to the others but went ahead anyway as it solved the problem. Having received it I would buy this head anyway for any machine in the future as it is such high quality and very robust, so very happy with purchase.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Bolton
    3.0 out of 5

    OK

    Not like the original. No roller wheels so hard work when vacuuming carpet.

    Ease of fitting 5.0 out of 5
    Quality 3.0 out of 5
    Value 3.0 out of 5
  • Herts
    5.0 out of 5

    Good Quality Tool

    Very easy to use and much better than original supplied with cleaner. Needed to be screwed very tightly on 30mm tube but worked.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

4 Questions and 6 Answers

By Mara - - 14 October 2008
  • Anyone with a vacuum cleaner that has a faulty head and who either cant find an original replacement or the original is too expensive By navinitram - Northamptonshire - 21 April 2010
  • anyone with a broken vax floor tool By monsterherman - wandsworth london - 16 February 2010
  • Matt from eSpares
    Matt at eSpares says...

    We would always recommend a genuine part, instead of a universal part, for your vacuum if one is available. Please enter your model number in the search facility above to see if we carry the genuine part for your vacuum prior to ordering this universal part. If we do not carry a genuine part for your vacuum please make sure to double check the measurements of this item prior to ordering to make sure it will fit your cleaner.

Answer this question

Hi ,will this fit my model

By R W - Gateshead - 19 May 2016
  • Matt from eSpares
    Matt at eSpares says...

    Measure the end of your hose connector to confirm it has an external diameter of between 30.5 and 37 mm as per the video to confirm suitability.

Answer this question
By Ns - - 04 March 2016
  • Matt from eSpares
    Matt at eSpares says...

    This is likely to fit (see the attached video for details) but to confirm we need your full model number. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question

The Dyson DC01 does not have an open-ended wand as tools have to fit into the plastic holder. Any advice please.

By pedlar - - 28 July 2010
  • cut it off with a metal cutting saw By 4753baca - southampton - 02 September 2010
Answer this question