Universal Vacuum Cleaner Floor Tool (30.5 - 37mm)

Stock Number: ES478316

In Stock Available for immediate despatch

Rated 4.5 out of 5 (532 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance?

This product is compatible with:

  • Vacuum Cleaners - With Wands Of 30 to 37mm Diameter (Please See The Description And Video)


Universal Vacuum Cleaner Floor Tool 30.5 -37mm

This Universal Floor Tool is an eSpares top seller and works equally well on carpeting as it does on hard floors. Designed for maximum pick-up and fast removal.


  • Large (270 x 87mm) for maximum pick-up of dust and dirt.
  • Adjustable hose fitting (30.5 to 37mm*) suitable for almost every make of vacuum cleaner (not Dyson). Adjust the fitting by tightening the black plastic screw cap on the threaded housing of the tool to create a smaller or larger connection and to tighten the extension tube in place.
  • Two swivel type buttons (brush out and brush in) on the top allow you to easily switch between brush out (normally used on hard floors) and brush in (normally used on carpets) depending on what you are using your vacuum tool for.
  • Supplied with screw fit collar and pip fitting collar.

Please Note: The size of 30.5 to 37mm refers to the size of the vacuum extension tube. To measure this, measure the outside diameter of the hose connected to your vacuum.

Important: Please ensure you check that the connection fitting size is suitable for your vacuum prior to purchase.

More product images

Product Reviews

Rated 4.5 out of 5 (532 customers)
Write a review
  • my parts

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - weston super mare

    excellent service, even though we didnt speak i felt the service was with a smile. The site is so easy to use. message for new customers If everything else fails read the instructions. Thankyou the part works fine.
  • Brilliant

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Ireland

    This is my third head, they're great, my wife loves them.
  • Just the job

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5


    The multi size head is perfect for all hoovers in the house if needed

Ask & Answer

(4 Questions and 6 Answers) Ask a question
  • Q Who should order universal parts? 3 Answers

    By Mara - 14 October 2008

    • A
      Anyone with a vacuum cleaner that has a faulty head and who either cant find an original replacement or the original is too expensive

      By navinitram - Northamptonshire - 21 April 2010

    • A
      anyone with a broken vax floor tool

      By monsterherman - wandsworth london - 16 February 2010

    • A
      We would always recommend a genuine part, instead of a universal part, for your vacuum if one is available. Please enter your model number in the search facility above to see if we carry the genuine part for your vacuum prior to ordering this universal part. If we do not carry a genuine part for your vacuum please make sure to double check the measurements of this item prior to ordering to make sure it will fit your cleaner.

      By Samara eSpares Staff - 14 October 2008

  • Q Hoover Vortex Model number TH/VX01001 1 Answer

    Hi ,will this fit my model

    By R W - Gateshead - 19 May 2016

    • A
      Measure the end of your hose connector to confirm it has an external diameter of between 30.5 and 37 mm as per the video to confirm suitability.

      By Chris eSpares Staff - 20 May 2016

  • Q Will it work with Samsung cycloneforce? 1 Answer

    By Ns - 04 March 2016

    • A
      This is likely to fit (see the attached video for details) but to confirm we need your full model number. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

      By Chris eSpares Staff - 07 March 2016

  • Q How to fit floor tool to DC01 1 Answer

    The Dyson DC01 does not have an open-ended wand as tools have to fit into the plastic holder. Any advice please.

    By pedlar - 28 July 2010

    • A
      cut it off with a metal cutting saw

      By 4753baca - southampton - 02 September 2010