Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Hoover Washing Machine Door Hinge for PE235 Stock Number: ES187341

Hoover Washing Machine Door Hinge for PE235 - ES187341
View video

4.9 out of 5 Rated 4.9 out of 5(123 customers)

Genuine Hoover spare part that will fit select washing machines

Read more

Manufactured by Hoover

Will this part fit my Appliance?


This part is compatible with Hoover PE235 Washing Machines.

Important: 31000106

Not what you're looking for?
See all parts for your appliance.

Washing Machine Door Hinge

If your door is doing more hanging than the washing then you really should replace the hinge. This spare will have your machine door stable once again. Replacing a broken door hinge will make getting in and out of your machine easier, and it's a quick fix. This door hinge will have your washing machine door operating smoothly again in no time at all.

Genuine spare part suitable for select models of Hoover washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.


Write a review

Here’s what other people are saying about Hoover Washing Machine Door Hinge for PE235.

(123 reviews)

4.9 out of 5

Ease of fitting 4 out of 5
Quality 4 out of 5
Value 5 out of 5
  • 5.0 out of 5

    washing machine door hinge

    Exactly as described. Arrived next day. The video how to fit the door hinge was really helpful. Perfect.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
    5.0 out of 5

    how to save the cost of a new washing machine

    Once again Espares have saved the day. Not only was the part provided a perfect fit but with the HOW TO video on their website it was a doddle to fit. Good products, good after sales and great prices must make them number one for spares. Well done team as you have another very satisfied customer

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • 5.0 out of 5

    Great service

    delivered quickly, good quality and value for money

    Ease of fitting 4.0 out of 5
    Quality 4.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

6 Questions and 9 Answers

By greenspeed - Blackpool - 11 May 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Greenspeed, we have a How-To video on fitting a washing machine door hinge in our Advice Centre. You can watch it here:

  • No, I didn't need anything except large screwdriver to separate door into two bits. After removing screws, door will not fall apart. Use the screwdriver to prise door apart. You'll have a nervous moment or two but go for it - it will come apart will a bit of persuasion. Hinge can then be easily inserted, screws replaced and door rehung onto machine. (Special star screwdriver was required for screws - had similar in a drill bit set) By ntsmaster - N.Ireland - 08 March 2010
  • No seals 5requiredr but check that the parts which hold the new hinge are in good condition. By fzrhunter - london - 20 July 2009
Answer this question

door came away in my hand as the hinge literally sheered off - part is left on the door - main hinge on the machine. if I order a new one - will it fit in the door OK or do I need the door as well? Also could yu let me know the right one to buy as I can't see it on the list?

By uglyfishface - - 14 February 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Uglyfishface, you'll need to find your machine's model number to find out whether this hinge fits - the number you quoted is the series number. Click the 'Here's how >>' link above for help. With regards to fitting the part, you should only need the hinge, as long as the door parts are still intact. Check out our video on how to fit a hinge here:

  • the same thing happened to me, i bought this hinge - I identified the one i needed from the pics on the site, but you will probably need the part that goes inside the door as well. I only found this out when trying to fit the hinge so am back on the site looking for the part. By emo2 - Durham - 08 March 2009
Answer this question

Hi thank you for the video, after taking the seal off I find I need new internal hinges/brackets as the external hinge has snapped off inside on of the internal brackets/hinge can you advise which part I need for this. Its a hoover Six Express 1300 WDM 130.

By SuzieQ - Leicester - 25 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    Stock Number: ES545965 has the usual hinge parts that are required for your machine.

Answer this question

I brought a door hinge from you a couple of weeks ago for a SE234-80 and fitted it ok but after fitting the machine starts ok but after a while it stops and I was wondering if there are any sensors I need to look at

By clive - aldermaston - 22 August 2014
  • Chris from eSpares
    Chris at eSpares says...

    There are no sensors in the door. See our video: How to diagnose washing machine control and program problems

Answer this question
By floorflush - Kent - 01 November 2010
  • Rory from eSpares
    Rory at eSpares says...

    Hi floorflush, this hinge comes as pictured; without any additional parts. To find the other parts you're after simply search your washing machine's model number using the bar at the top of the page to list all parts available for it.

Answer this question
See all questions and answers
Please contact us as we may be able to find you a suitable replacement.