If your door is doing more hanging than the washing then you really should replace the hinge. This spare will have your machine door stable once again. This is a genuine spare part that will fit select Candy, Friac, Hoover, Iberna, Kelvinator, Teka, Vyatka & Zerowatt washing machines.
Please note: This part is serial number dependent, please contact our call centre with the serial number from your appliance so we can advise if this spare will fit.
Other part numbers for this item: 09201334
How to fix a washing machine door hinge
This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.
Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.
QI except you have to split the door to fit the hinge. Do I need any parts that fit inside the door.Eg seals ect3 Answers
By greenspeed- Blackpool
- 11 May 2009
Hi Greenspeed, we have a How-To video on fitting a washing machine door hinge in our Advice Centre. You can watch it here: http://www.espares.co.uk/advice/washing-machines/a/7/1209/how-to-replace-a-washing-machine-door-hinge-a.html
- 09 March 2010
No, I didn't need anything except large screwdriver to separate door into two bits. After removing screws, door will not fall apart. Use the screwdriver to prise door apart. You'll have a nervous moment or two but go for it - it will come apart will a bit of persuasion. Hinge can then be easily inserted, screws replaced and door rehung onto machine. (Special star screwdriver was required for screws - had similar in a drill bit set)
By ntsmaster- N.Ireland
- 08 March 2010
No seals 5requiredr but check that the parts which hold the new hinge are in good condition.
QCan you advise if the part I mention below will do the full job please - hoover 1300 special edition door hinge - see below?2 Answers
door came away in my hand as the hinge literally sheered off - part is left on the door - main hinge on the machine. if I order a new one - will it fit in the door OK or do I need the door as well? Also could yu let me know the right one to buy as I can't see it on the list?
- 14 February 2009
Hi Uglyfishface, you'll need to find your machine's model number to find out whether this hinge fits - the number you quoted is the series number. Click the 'Here's how >>' link above for help.
With regards to fitting the part, you should only need the hinge, as long as the door parts are still intact. Check out our video on how to fit a hinge here: http://www.espares.co.uk/advice/washing-machines/a/7/1209/how-to-replace-a-washing-machine-door-hinge-a.html
- 09 March 2010
the same thing happened to me, i bought this hinge - I identified the one i needed from the pics on the site, but you will probably need the part that goes inside the door as well. I only found this out when trying to fit the hinge so am back on the site looking for the part.
QMy door hinge and has broken as has what it connects to in the door. Does this hinge come with both parts?1 Answer
By floorflush- Kent
- 01 November 2010
Hi floorflush, this hinge comes as pictured; without any additional parts. To find the other parts you're after simply search your washing machine's model number using the bar at the top of the page to list all parts available for it.