Hoover Washing Machine Door Hinge

Stock Number: ES187341

Manufactured by Hoover

In Stock Available for immediate despatch

Rated 4.9 out of 5 (99 customer reviews)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Description

If your door is doing more hanging than the washing then you really should replace the hinge. This spare will have your machine door stable once again. This is a genuine spare part that will fit select Candy, Friac, Hoover, Iberna, Kelvinator, Teka, Vyatka & Zerowatt washing machines.

Please note: This part is serial number dependent, please contact our call centre with the serial number from your appliance so we can advise if this spare will fit.

Other part numbers for this item: 09201334

How to fix a washing machine door hinge

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.9 out of 5 (99 customer reviews)
Write a review
  • Simple to buy, simple to fit

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Newton-le-Willows

    The product was easy to find, inexpensive to buy and the video on installation made the whole process straight forward.
  • Good Service - Excellent Product

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - BATH

    Hinge arrived very quickly as one has come to rely on from espares. On viewing video had no problem in fitting this item resulting in a very quick repair.
  • Happy enough with product and service

    • 5.0 out of 5
    • 3.0 out of 5
    • 4.0 out of 5
    • 4.0 out of 5

    By - South West

    Managed to fit myself, not quite as simple as the video but my door was slightly different. All done though and a lot cheaper than if I'd called someone out. Will use again for simple looking jobs.

Ask & Answer

(4 Questions and 7 Answers) Ask a question
  • Q I except you have to split the door to fit the hinge. Do I need any parts that fit inside the door.Eg seals ect 3 Answers

    By greenspeed - Blackpool - 11 May 2009

    • A
      Hi Greenspeed, we have a How-To video on fitting a washing machine door hinge in our Advice Centre. You can watch it here: http://www.espares.co.uk/advice/washing-machines/a/7/1209/how-to-replace-a-washing-machine-door-hinge-a.html

      By Rory eSpares Staff - 09 March 2010

    • A
      No, I didn't need anything except large screwdriver to separate door into two bits. After removing screws, door will not fall apart. Use the screwdriver to prise door apart. You'll have a nervous moment or two but go for it - it will come apart will a bit of persuasion. Hinge can then be easily inserted, screws replaced and door rehung onto machine. (Special star screwdriver was required for screws - had similar in a drill bit set)

      By ntsmaster - N.Ireland - 08 March 2010

    • A
      No seals 5requiredr but check that the parts which hold the new hinge are in good condition.

      By fzrhunter - london - 20 July 2009

  • Q Can you advise if the part I mention below will do the full job please - hoover 1300 special edition door hinge - see below? 2 Answers

    door came away in my hand as the hinge literally sheered off - part is left on the door - main hinge on the machine. if I order a new one - will it fit in the door OK or do I need the door as well? Also could yu let me know the right one to buy as I can't see it on the list?

    By uglyfishface - 14 February 2009

    • A
      Hi Uglyfishface, you'll need to find your machine's model number to find out whether this hinge fits - the number you quoted is the series number. Click the 'Here's how >>' link above for help. With regards to fitting the part, you should only need the hinge, as long as the door parts are still intact. Check out our video on how to fit a hinge here: http://www.espares.co.uk/advice/washing-machines/a/7/1209/how-to-replace-a-washing-machine-door-hinge-a.html

      By Rory eSpares Staff - 09 March 2010

    • A
      the same thing happened to me, i bought this hinge - I identified the one i needed from the pics on the site, but you will probably need the part that goes inside the door as well. I only found this out when trying to fit the hinge so am back on the site looking for the part.

      By emo2 - Durham - 08 March 2009

  • Q My door hinge and has broken as has what it connects to in the door. Does this hinge come with both parts? 1 Answer

    By floorflush - Kent - 01 November 2010

    • A
      Hi floorflush, this hinge comes as pictured; without any additional parts. To find the other parts you're after simply search your washing machine's model number using the bar at the top of the page to list all parts available for it.

      By Rory eSpares Staff - 02 November 2010

  • Q Stock Number: ES187341 Door hinge 1 Answer

    Can you confirm this part is correct for; Hoover washing machine Ultracare 1100 Thank you.

    By JACKBUILT - 07 July 2009

    • A
      it is the part for my machine, I can't comment for your machine as I don't know your model

      By Geobet - SCotland - 02 September 2009