Tumble Dryer 3 Rib Drive Belt 1547J3 - 1547 E3PJ Stock Number: ES185415
Genuine part for select White Knight (Crosslee) and Zanussi tumble dryers
Manufactured by White Knight (Crosslee)
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer 3 Rib Drive Belt - 1547 E3PJ
A tumble dryer that's vented to the outside is an efficient way to make sure moisture does not build up inside your property. So if it sounds like something you need, give eSpares a go. This vent is ideal for expelling hot, damp air outside your property reducing the risk of condensation and mould inside your house.
Specification:
- Length: 1547mm
- Type: Poly-vee
- Section: E3PJ
- 3 Ribbed
Please note: this is a 3 ribbed belt it is not interchangeable with a 4 rib belt and can only be used on a machine with a 3 ribbed drum pulley
Genuine spare part suitable for select models of White Knight and Zanussi tumble dryers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
6 Questions and 10 Answers
- I followed hectorsden instructions, but couldn't get enough room to get the belt in by easing the door back, so I took half the screws out of one side of the backplate and eased that back - this gave me enough room to get the belt in. Getting the belt over the drive pulley was tough - in the end I used a gardening thing like a tiny rake with three metal prongs on it - I hooked the belt and managed to pull it over the pulley. Took me an hour to do it, but all working great now!
- I used the instructions above by hectorden and got the belt fitted pretty quickly. All I can add is that when I put it all back together there was a scraping noise where the fins at the back were rubbing against the metal back cover. The solutio was ultimately quite easy. You simply bend the fins back a bit. They are made of soft metal and bend back very easily. Mine had gone out of shape as I had tried to the propeller at the back off to get the belt on. PS I was very unimpressed with eSpares over this. I ordered on Sunday and it wasnt even despatched till the following Thursday. Very poor indeed and completely unable to provide an explanation, just a "its sent now" response by email.
- Not easy but with a bit of perseverance it can be done. I removed the top and back panel then eased the drum back from the door to be able to get the belt round the drum. Top tip when the belt is round the drum tape it in the centre with electrical tape to stop it moving around. I then turned the dryer upside down and removed the small inspection cover from the bottom and with a little bit of effort pulled the belt over the drive pulley. Put all the screws back in removed the electrical tape and job done.
My white knight tumbe dryer is model number WK447 the part number of the belt is different from this one but I just need to know the length to know if it will fit.
-
Rory at eSpares says...
Hi again Dtfixitman, I've done quite an exhaustive search with the info you've given me, and it's been pretty fruitless! I've gone through our supplier programs, sent emails, even just blind Googled! I'm afraid I can't find any matches for you whatsoever, and I wouldn't want to recommend you a belt that you might have to return. Sorry I couldn't be of more help.
- Hi Rory, its a fairly old machine but the model no. is definately WK447. The part no. of the belt is 4213 078 50862 and it's around 6ft long (182cm)
-
Rory at eSpares says...
Hi Dtfixitman, I'm afraid I can't match the model number you've given me in our database of White Knight machines. Would it be possible to double check? For help, use our guide: http://www.espares.co.uk/findingmodelnumbers.aspx#a7
fitted a new belt to my dryer supplied by espares. It is really tight, it was at least 100mm short of the pulley is this normal? 1 Answer
- The belt needs to be tight, don't forget a load of wet washing is heavy and if the belt is too loose then it will slip on the motor pully.
-
Samara at eSpares says...
Hi Anon, Here's our guide to finding the model number on a tumble dryer: http://www.espares.co.uk/findingmodelnumbers.aspx#a7 Hope that helps!
Model White Knight Spin dryer Model CL332WV
-
Rory at eSpares says...
Hi Nejo, I'm afraid we don't stock pulleys for the CL332WV, sorry.
Will this part fit my appliance?
Check Now
