Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Dualit Toaster Centre Element Stock Number: ES184607

Dualit Toaster Centre Element - ES184607

4.8 out of 5 Rated 4.8 out of 5(40 customers)

Genuine element to fit any Dualit 2, 3 and 4 Slice Vario, Combi 2+1, Combi 2x2, 4 Sandwich Toaster made in the last 50 years

Read more

Manufactured by Dualit

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Will this part fit my Appliance?

This product is compatible with:

  • Dualit Toasters

Toaster Centre Element

Designed by ProHeat specifically for Dualit Vario toasters, this element has a protective layer over the wires, making it virtually unbreakable.

It will fit any Dualit 4 Slice Vario, Combi 2x2, 2 & 4 Sandwich toaster made in the last 50 years, and is easily replaced if one does fail.

  • 2 Slice Vario toasters require 1x Centre Element (plus 2x 2 Slice End Element)
  • 3 Slice Vario toasters require 2x Centre Element (plus 2x 3 Slice End Element)
  • Combi 2+1 toasters require 2x Centre Element (plus 2x 3 Slice End Element)
  • 4 Slice Vario toasters require 3x Centre Element (plus 2x 4 Slice End Element)
  • Combi 2x2 toasters require 3x Centre Element (plus 2x 4 Slice End Element)
  • 4 Sandwich toasters require 1x Centre Element (plus 6x 4 Slice End Element)
Write a review

Here’s what other people are saying about Dualit Toaster Centre Element.

(40 reviews)

4.8 out of 5

Ease of fitting 4 out of 5
Quality 5 out of 5
Value 4 out of 5
  • Surrey
    5.0 out of 5

    Enables a quick and satisfactory repair

    One element in my toaster failed after some ten years of regular use - not bad! The web showed me that repair was simple and I ordered a replacement. I have just completed the repair which needed a screwdriver and small spanner and took about 20 minutes - far less time than taking it to an electrician and collecting it. A very satisfactory experience.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • East Kent
    4.0 out of 5

    As described

    This element looks slightly different to the original, but I put this down to different manufacturing process. It fits exactly the same way without modification. It is not as hot as the originals that are still in place so you get two slices of toast that are not as well done on one side.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
  • Leicestershire
    5.0 out of 5

    Keeps our favorite old toaster going

    This was a perfect fit and would have been easy to fit to our old toaster if I had a small spanner (not sure but 8mm or less) / very short crosshead screwdriver. ( or one with a right angle in the stem about 1 cm from the end ). Still managed to change it within an hour, even cleaned the rubbish that had collected

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

2 Questions and 2 Answers

Hi. I want some replacement elements for my Dulait toaster, but when I enter my model number on your site, it says that my toaster is'nt recognised. I have the 4SLGB model. It seems strange, as the toaster is only about 9 years old. Thanks

By Pete - Swinton - 26 July 2014
  • Chris from eSpares
    Chris at eSpares says...

    It is likely that you have another model number on a label underneath, click on http://www.espares.co.uk/browse/at1106ma981/toasters/small-appliances/dualit and then on the left 'more models' to identify your appliance.

Answer this question

breville pt25

By Mike - Birmingham - 03 January 2014
  • Chris from eSpares
    Chris at eSpares says...

    See our screwdriver bits sets: Stock Number: ES1526160 Stock Number: ES1584155 and Stock Number: ES1584179 as with one or more of these kits should be able to remove the screw.

Answer this question
Order within 9PM for UK Next Day Delivery