Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Universal Fridge "Plexiglass" Shelf Stock Number: ES1562230

Universal Fridge "Plexiglass" Shelf - ES1562230

4.2 out of 5 Rated 4.2 out of 5(156 customers)

Compatible cut to size plexiglass shelf suitable for most refrigerators

Read more

Will this part fit my Appliance?

This product is compatible with:

  • Fridges & Freezers - Please Check The Dimensions In The Description

Universal Fridge Plexiglass Shelf

This universal spare is made out of plexiglass - so you can cut it to size yourself. If your current shelf has shattered or cracked, it is best to have it replaced, because it will be unsafe to use and store your items on - and over time it will only become weaker.

To cut this glass, use a saw and then remove the sharp edges by using a file or sandpaper.

The important thing is to take note of its size (shown in specification area below), as this will help determine whether this particular shelf is suitable for your fridge.


  • Size: 550mm x 480mm x 5mm
  • Cut to size


Compatible spare part suitable for most refrigerators.

PLEASE NOTE: Prior to purchase of this item please check the dimensions to make sure this is the same size or slightly larger than your original shelf as it can be cut down. 

Write a review

Here’s what other people are saying about Universal Fridge "Plexiglass" Shelf.

(156 reviews)

4.2 out of 5

Ease of fitting 4 out of 5
Quality 4 out of 5
Value 5 out of 5
  • Northern Ireland
    5.0 out of 5

    Great product and value for money.

    I recently bought a new fridge and found that it came with two shelf spaces vacant. The price of two glass shelves from the manufacturer was about £50. I bought this plexglass sheet and cut two shelves from it using a hacksaw. I had retained the shelves from the old fridge (too wide) so I removed the front and rear trim from them, trimmed to size, and put them on the plexiglass shelves. The result....perfection at a fraction of the cost of glass replacements.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Lancs
    5.0 out of 5

    A good spare shelf for the fridge

    Good quality shelf. When cutting with a circular saw the plastic can melt if you don't push hard and cut fast.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Northern Ireland
    4.0 out of 5

    Good functional item

    This was bought to replace a glass shelf which was obviously more rigid. It was easy to cut to size and serves its purpose. It does flex a bit in the middle but this is to be expected. Great value for money and fast delivery.

    Ease of fitting 5.0 out of 5
    Quality 4.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

16 Questions and 18 Answers

By Anonymous - - 26 June 2014
  • Well believe it or not ..... I used all I had available A SAW ! Yep normal wood saw and it took me five mins . A couple of tips whilst your trying . Keep the saw as level as possible so cutting more across the length rather than into it and just go along with its OWN speed ! When you near the end take it slowly with NO pressure else it may crack , and its done . By Anonymous - Oxford - 11 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    Check some of the reviews, most seem to have success using a fine toothed saw.

Answer this question
By Mike - Haywards Heath - 20 July 2013
  • (I think the earlier answer may be for a different question!!) This plexiglass is plastic rather than true glass, and the intention is for you to cut the shelf to size. Measure and mark carefully, maybe applying something you can write on, preferably to the removable plastic film ('magic tape' or labels or decorators tape etc). Use either a fine-tooth saw or a jigsaw or a water-cooled diamond-wheel tile-cutting machine, then gently smooth off the cut edges, e.g. with a sanding block. Do NOT try score-and-snap, it doesn't work well on this material. If you could cope with a width of 273.5mm rather than 285mm, you'd just get 2 shelves out of this item. By Ron - Kingston area - 05 August 2014
  • Lloyd Handahu from eSpares
    Lloyd Handahu at eSpares says...

    Closely check whether the door is closing squarely to the cabinet. If not, the door hinges may be faulty. Try removing the door seal to determine whether the door closes further - if it does not this would indicate a fault with the hinges. Otherwise, you may need to replace the seal.

Answer this question


By JOHN - yeovil - 25 January 2017
  • Parminder from eSpares
    Parminder at eSpares says...

    This wouldn't be suitable to hold the weight of freezer containers.

Answer this question
By MoQ - Leeds - 31 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: Alternatively please copy and paste this link into your web browser.

Answer this question

Under weight (like 2 litre milk containers) it tends to bend. All the shelves that came with the fridge have an edging strip that stops them bending. This was a present from my daughter and I would like to use it!

By John Rowley - Swanage - 18 December 2015
  • Chris from eSpares
    Chris at eSpares says...

    We do not sell 'edging' for this product. Either swap shelves for a lighter loaded original, or you can either 'double up' the shelf or glue strips of off cut under to reinforce the shelve.

Answer this question
See all questions and answers
Order within 9PM for UK Next Day Delivery