Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Bosch Lawnmower On/Off Switch Stock Number: ES1394721

Bosch Lawnmower On/Off Switch - ES1394721
View video

4.9 out of 5 Rated 4.9 out of 5(68 customers)

Genuine spare part for select Bosch 'ROTAK' lawnmowers

Read more

Manufactured by Bosch

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Lawnmower On/Off Switch

A pretty essential part to your appliance, this switch turns your lawnmower on and off!

Genuine spare for select Bosch 'ROTAK' lawnmower models - please see the list of appliances to ensure the part fits your model.

Write a review

Here’s what other people are saying about Bosch Lawnmower On/Off Switch.

(68 reviews)

4.9 out of 5

Ease of fitting 4 out of 5
Quality 4 out of 5
Value 4 out of 5
  • East Sussex
    5.0 out of 5

    Replacement for arcing lawn mower mains switch

    The original Bosch switch was only four years old yet arcing enough to trip mains breaker. Original switch not really man enough to switch mains voltage, but no alternative but to buy a like for like replacement. Looks as good and same as the original fit, so we will see how long this one lasts compared to Bosch factory fit.

    Ease of fitting 4.0 out of 5
    Quality 4.0 out of 5
    Value 4.0 out of 5
  • N. Wales
    5.0 out of 5

    Better to be safe etc

    An unnecessary purchase as it turned out! But at least I now have a spare!

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
  • 5.0 out of 5

    Problem was not switch!

    Failure was not due to switch, but your detailed explanations and method enabled me to establish the fault was adamaged lead (as I had a spare no further purchase was required) The cost of the switch was well worth it , I was contemplating replacing the mower.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

4 Questions and 4 Answers

i soldered the cable ends but the cable is to soft to push in

By dg - morden/uk - 13 September 2015
  • Chris from eSpares
    Chris at eSpares says...

    If the wire is stripped then twisted and tinned with solder all along the exposed copper is should then push into the switch correctly.

Answer this question
By sandy - prescot - 03 May 2014
  • Chris from eSpares
    Chris at eSpares says...

    For more information on this repair see the video we have now attached to this part.

Answer this question
By Alan - - 28 April 2014
  • Chris from eSpares
    Chris at eSpares says...

    Yes.

Answer this question

The switch does not have screws to fix the wires as one would normally expect.

By Anonymous - - 18 June 2011
  • the wires you just have to push them in the correct place as the others, was fitted if you cut the wires from the other switch it would be best to solder the ends before fitting them as it would be a lot easier. By vas - Middlesex - 22 June 2011
Answer this question
Order within 9PM for UK Next Day Delivery