Universal Fan Oven Motor 220/240V

Stock Number: ES1331607

In Stock Available for immediate despatch

Rated 4.5 out of 5 (462 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance?

This product is compatible with:

  • Cookers & Hobs - ensure the dimensions of your motor match the description


High Quality Replacement Fan Oven Motor 220/240V 

Has the fan in your oven stopped working? Is your food no longer being cooked evenly throughout? There may be a problem with the motor. Well you needn't worry anymore, eSpares has the perfect part for this problem. Here we have a genuine Hotpoint replacement fan motor, which will get your oven back to 100%. The fan will be rotating once again to ensure your food is cooked to perfection!


  • 220 / 240 V
  • 50HZ
  • 32W
  • Diameter of motor mounting plate: 130mm
  • Depth of motor and mounting plate: 60mm
  • Length of spindle between mounting plate and fan blade: 20mm
  • Diameter of fan blade: 150mm
  • Depth of fan blade: 22mm
  • Note: not supplied with mounting screws (these may be different to your originals depending on appliance)

Please check the dimensions and the specifications match those of your original fan motor to be sure it will fit your oven. Specifications can usually be found printed on the original motor.

More product images

Product Reviews

Rated 4.5 out of 5 (462 customers)
Write a review
  • good

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - N.I.

    remove back to get access need two one to hold nuts from inside oven,the other to undo nuts/bolts, take note of wire connections. Renew oven ring as well if it looks about to split.
  • Excellent but..

    • 5.0 out of 5
    • 3.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Dartford kent

    Not a direct replacement as advertised needed mounts drilled but not too hard.
  • No problems, I can bake again!

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5


    The part is a direct but not exact fit for the diplomat fan that had died; it's just twisted a few degrees to line the correct holes on the adaptor plate. All the power leads reach properly, so excellent all round.

Ask & Answer

(63 Questions and 63 Answers) Ask a question
  • Q I am unable to release the nut that holds the fan in place. 3 Answers

    I am aware that it is opposite thread but the oven has been in use for 10 years or so, is there a particular method for releasing this nut. Not sure about using WD40 in the oven as the smell would linger.

    By Anonymous - Liverpool - 03 April 2012

    • A
      I struggled with removing the fan blade from my NEFF oven. 10mm nut came off ok using socket set and just holding the blade in position with my hand, problem was then removing the additional shaped washer and the blade itself. Found that gripping the threaded end with some mole grips and them rotating the blade by hand did the trick, although I had to work at it.

      By John - Staffordshire - 18 May 2015

    • A
      It doesn't matter ,as if your changing the whole fan assembly you don't need any of the old fan,,) and wd40 is fine to use ,but clean off all parts left in oven ,

      By Tricky trev g - Southampton Eastleigh area - 06 July 2013

    • A
      I've just removed mine from my cooker thats been used every day for more than ten years. You are right to unscrew the nut by turning clock wise(this is opposite to normal).Hold the fan blade with one hand - maybe with a glove on and using a 10mm spanner undo the nut, it does not matter if you have to use excessive force or even shear the fan motor spindle as obviously you are removing the fan blade to replace the fan motor i presume.

      By Bert - Norfolk - 24 April 2012

  • Q When i turn the oven on there is a delay thats getting longer before the fan starts. Does this mean it needs replacing? 2 Answers

    By Ann - Northampton - 15 September 2011

    • A
      A Slower and slower start for the fan was symptomatic of the need for a new one. But beware - the element relies on the airflow to cool it Left un cooled it will eventually blow , as mine did , resulting in another 20 quid down the pan. Change the fan now and you might be lucky.

      By spanners - merseyside - 16 December 2011

    • A
      Sounds like you mighht have a loose conection or it on its way out. I would just wait till it packs in or open up back and check all spade conectors if it is not to much hastle for yourself

      By mikey - glasgow - 21 September 2011

  • Q Grill works for short time then cuts out 1 Answer

    Grill cutting out seems to be overheating,fan isnt coming on .Is it fan motor or thermostat

    By R B - Highlands - 20 March 2016

    • A
      If your cooker has a cooling fan and it is not working then this may be the cause. Note: Many grill's must have the door open or the top oven thermostat may cycle the element when hot.

      By Chris eSpares Staff - 21 March 2016

  • Q Our old fan is 24 to 28 watts, the universal replacement is 35w will this be an issue? 1 Answer

    By Kws - Devon - 14 February 2016

    • A
      No, provided the fitting dimensions match your appliance.

      By Chris eSpares Staff - 15 February 2016

  • Q Just turned oven on and the fan is glowing red and not moving or making any noise, its a Kenwood CK304 dual fuel oven 1 Answer

    By Donna - Taunton - 10 January 2016

    • A
      Replace the fan as it is likely the bearings have failed and will cause the element to fail as well.

      By Chris eSpares Staff - 18 January 2016