Universal Oven Fan Motor

Stock Number: ES1331607

Manufactured by Hotpoint

(This part fits select Zanussi models)

In Stock Available for immediate despatch

Rated 4.5 out of 5 (445 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance?

This product is compatible with:

  • Cookers & Hobs - ensure The Dimensions Of Your Motor Match The Description


Universal Oven Fan Motor

Has the fan in your oven stopped working? Is your food no longer being cooked evenly throughout? There may be a problem with the motor. Well you needn't worry anymore, eSpares has the perfect part for this problem. Here we have a genuine Hotpoint replacement fan motor, which will get your oven back to 100%. The fan will be rotating once again to ensure your food is cooked to perfection!


  • 220 / 240 V
  • 50HZ
  • 32W
  • Diameter of motor mounting plate: 130mm
  • Depth of motor and mounting plate: 60mm
  • Length of spindle between mounting plate and fan blade: 20mm
  • Diameter of fan blade: 150mm
  • Depth of fan blade: 22mm
  • Note: not supplied with mounting screws (these may be different to your originals depending on appliance)

Please check the dimensions and the specifications match those of your original fan motor to be sure it will fit your oven. Specifications can usually be found printed on the motor.

How to replace an oven fan motor

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.5 out of 5 (445 customers)
Write a review
  • Fan motor

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Lichfield

    As many other reviews said the shaft was too long fir my indesit oven. However I just used the motor off the new one and used the shaft etc off the original. Good as new
  • "Universal" fitting fan?

    • 3.0 out of 5
    • 3.0 out of 5
    • 3.0 out of 5
    • 5.0 out of 5

    By - Presteigne

    Mounting holes lined up ok, the fan shaft was about 20mm longer than the original. You don't realise until you've fitted the fan and try to reinstall the inside cover, which fouls the fan blades. So fan motor back off and fitted Spacers. Okay in the end but not without problems, extra parts and ingenuity. Espares service is great and maybe I should've returned it but the oven was in bits and so was the wife!
  • Great service

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Sheffield

    So easy to fit and saved a lot of money ,all I had to do was type in the model number and correct product came up

Ask & Answer

(61 Questions and 61 Answers) Ask a question
  • Q I am unable to release the nut that holds the fan in place. 3 Answers

    I am aware that it is opposite thread but the oven has been in use for 10 years or so, is there a particular method for releasing this nut. Not sure about using WD40 in the oven as the smell would linger.

    By Anonymous - Liverpool - 03 April 2012

    • A
      I struggled with removing the fan blade from my NEFF oven. 10mm nut came off ok using socket set and just holding the blade in position with my hand, problem was then removing the additional shaped washer and the blade itself. Found that gripping the threaded end with some mole grips and them rotating the blade by hand did the trick, although I had to work at it.

      By John - Staffordshire - 18 May 2015

    • A
      It doesn't matter ,as if your changing the whole fan assembly you don't need any of the old fan,,) and wd40 is fine to use ,but clean off all parts left in oven ,

      By Tricky trev g - Southampton Eastleigh area - 06 July 2013

    • A
      I've just removed mine from my cooker thats been used every day for more than ten years. You are right to unscrew the nut by turning clock wise(this is opposite to normal).Hold the fan blade with one hand - maybe with a glove on and using a 10mm spanner undo the nut, it does not matter if you have to use excessive force or even shear the fan motor spindle as obviously you are removing the fan blade to replace the fan motor i presume.

      By Bert - Norfolk - 24 April 2012

  • Q When i turn the oven on there is a delay thats getting longer before the fan starts. Does this mean it needs replacing? 2 Answers

    By Ann - Northampton - 15 September 2011

    • A
      A Slower and slower start for the fan was symptomatic of the need for a new one. But beware - the element relies on the airflow to cool it Left un cooled it will eventually blow , as mine did , resulting in another 20 quid down the pan. Change the fan now and you might be lucky.

      By spanners - merseyside - 16 December 2011

    • A
      Sounds like you mighht have a loose conection or it on its way out. I would just wait till it packs in or open up back and check all spade conectors if it is not to much hastle for yourself

      By mikey - glasgow - 21 September 2011

  • Q Just turned oven on and the fan is glowing red and not moving or making any noise, its a Kenwood CK304 dual fuel oven 1 Answer

    By Donna - Taunton - 10 January 2016

    • A
      Replace the fan as it is likely the bearings have failed and will cause the element to fail as well.

      By Chris eSpares Staff - 18 January 2016

  • Q Hi, I have purchased a new main oven element from you but its not the problem the fan does not work. 1 Answer

    would the fan stop the element working if it was faulty?

    By M R Taylor - DE159DS - 16 December 2015

    • A
      For information on your repair see our video: How to diagnose problems with your oven: www.espares.co.uk/advice/1/2145

      By Chris eSpares Staff - 18 December 2015

  • Q Fitted new element but now fan won't work and no heat at all. Read that the fan just helps the heat to circulat. Would it also stop the h 1 Answer

    De Dietrich dod778b3

    By Jd - Hampshire uk - 05 December 2015

    • A
      Make sure the timer is set. For information on your repair see our video: How to diagnose problems with your oven: www.espares.co.uk/advice/1/2145

      By Chris eSpares Staff - 07 December 2015