Universal Oven Fan Motor

Stock Number: ES1331607

Manufactured by Hotpoint

(This part fits select Tricity Bendix models)

In Stock Available for immediate despatch

Rated 4.6 out of 5 (392 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance?

This product is compatible with:

  • Cookers & Hobs : You must check the dimensions match your motor

Description

Universal Oven Fan Motor

Has the fan in your oven stopped working? Is your food no longer being cooked evenly throughout? There may be a problem with the motor. Well you needn't worry anymore, eSpares has the perfect part for this problem. Here we have a genuine Hotpoint replacement fan motor, which will get your oven back to 100%. The fan will be rotating once again to ensure your food is cooked to perfection!

Specification:

  • 220 / 240 V
  • 50HZ
  • 32W
  • Diameter of motor mounting plate: 130mm
  • Depth of motor and mounting plate: 60mm
  • Length of spindle between mounting plate and fan blade: 20mm
  • Diameter of fan blade: 150mm
  • Depth of fan blade: 22mm
  • Note: not supplied with mounting screws (these may be different to your originals depending on appliance)

Please check the dimensions and the specifications match those of your original fan motor to be sure it will fit your oven. Specifications can usually be found printed on the motor.

How to replace an oven fan motor

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.6 out of 5 (392 customers)
Write a review
  • Fitted Diplomat Select 920

    • 5.0 out of 5
    • 4.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Long Eaton

    Great value. Easy to fit though did need to bend fan blades a little. Bearing gone on original motor so very noisy.Saved several hundred pou ds by replacing motor not oven! Oven now working quietly and efficiently. Video on replacement was very useful.
  • OK as a replacement

    • 4.0 out of 5
    • 3.0 out of 5
    • 4.0 out of 5
    • 4.0 out of 5

    By - High Wycombe

    A bit fiddly to fit as existing cables not long enough as the fan had to be fitted at an angle to match the fixing holes. Works well and a much cheaper replacement.
  • Really Pleased

    • 4.0 out of 5
    • 3.0 out of 5
    • 4.0 out of 5
    • 5.0 out of 5

    By - Derbyshire

    Learning that a new fan for our oven was no longer available to replace the broken one, I was left with two options, scrap the cooker and buy another one(cheapest quote nearly four hundred pounds plus the cost of installing a new electric switch), or try this universal oven fan. Before buying this fan, I read reviews like this one and realised I may have to put some spacers for both the retaining screws and the shaft so that it would fit. I am so pleased I did, because I was able to use washers/nuts to act as spacers and the fan has now worked perfectly since fitting it (over two weeks) so I know now it will not only continue working but that in the event of it failing in the future, I will be able to use another universal fan motor.(assuming they don't stop making these!) Thanks espares.

Ask & Answer

(53 Questions and 52 Answers) Ask a question
  • Q I am unable to release the nut that holds the fan in place. 2 Answers

    I am aware that it is opposite thread but the oven has been in use for 10 years or so, is there a particular method for releasing this nut. Not sure about using WD40 in the oven as the smell would linger.

    By Anonymous - Liverpool - 03 April 2012

    • A
      It doesn't matter ,as if your changing the whole fan assembly you don't need any of the old fan,,) and wd40 is fine to use ,but clean off all parts left in oven ,

      By Tricky trev g - Southampton Eastleigh area - 06 July 2013

    • A
      I've just removed mine from my cooker thats been used every day for more than ten years. You are right to unscrew the nut by turning clock wise(this is opposite to normal).Hold the fan blade with one hand - maybe with a glove on and using a 10mm spanner undo the nut, it does not matter if you have to use excessive force or even shear the fan motor spindle as obviously you are removing the fan blade to replace the fan motor i presume.

      By Bert - Norfolk - 24 April 2012

  • Q When i turn the oven on there is a delay thats getting longer before the fan starts. Does this mean it needs replacing? 2 Answers

    By Ann - Northampton - 15 September 2011

    • A
      A Slower and slower start for the fan was symptomatic of the need for a new one. But beware - the element relies on the airflow to cool it Left un cooled it will eventually blow , as mine did , resulting in another 20 quid down the pan. Change the fan now and you might be lucky.

      By spanners - merseyside - 16 December 2011

    • A
      Sounds like you mighht have a loose conection or it on its way out. I would just wait till it packs in or open up back and check all spade conectors if it is not to much hastle for yourself

      By mikey - glasgow - 21 September 2011

  • Q will this fan and motor fit my rangemaster classic 90 cooker? 1 Answer

    By Anonymous - spalding lincs - 18 February 2015

    • A
      In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

      By Chris eSpares Staff - 19 February 2015

  • Q My Miele H268B fan motor has 3 connections to the coil, one side red and black then opposite red is a blue wire but this motor only has 2 connections 1 Answer

    By Al - London - 12 February 2015

    • A
      The correct motor for your oven is ES1605402. Replacing with this motor may require modification.

      By Chris eSpares Staff - 13 February 2015

  • Q Will this oven fan motor fit a Creda continental double oven No. 481443? 1 Answer

    The fan and the element stopped working at the same time.Replaced the element but still no joy. Is the problem the fan motor? Does one part need the other to work?

    By Dave - Herefordshire. - 10 February 2015

    • A
      It is not likely to be the fan motor but may be a thermal cut out. For information on your repair see our video: http://www.espares.co.uk/advice/1/2145 /how-to-diagnose-problems-with-your-oven

      By Chris eSpares Staff - 11 February 2015