Universal Oven Fan Motor

Stock Number: ES1331607

Manufactured by Hotpoint

(This part fits select Tecnik models)

In Stock Available for immediate despatch

Rated 4.6 out of 5 (372 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance?

This product is compatible with:

  • Cookers & Hobs


Universal Oven Fan Motor

Has the fan in your oven stopped working? Is your food no longer being cooked evenly throughout? There may be a problem with the motor. Well you needn't worry anymore, eSpares has the perfect part for this problem. Here we have a genuine Hotpoint replacement fan motor, which will get your oven back to 100%. The fan will be rotating once again to ensure your food is cooked to perfection!


  • 220 / 240 V
  • 50HZ
  • 32W
  • Diameter of motor mounting plate: 130mm
  • Depth of motor and mounting plate: 60mm
  • Length of spindle between mounting plate and fan blade: 20mm
  • Diameter of fan blade: 150mm
  • Depth of fan blade: 22mm
  • Note: not supplied with mounting screws (these may be different to your originals depending on appliance)

Please check the dimensions and the specifications match those of your original fan motor to be sure it will fit your oven. Specifications can usually be found printed on the motor.

How to replace an oven fan motor

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.6 out of 5 (372 customers)
Write a review
  • Not quite universal, but good enough!

    • 5.0 out of 5
    • 3.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Huddersfield

    I purchased this universal motor for a Smeg A42 cooker. Fitting was easy, but it did need to motor rotating 90 degrees to match the Smeg fixing holes. The only snag was that Smeg use self tapping screws which were smaller than the M5 threads in this motor plate. Had to dig round in the spares box to find suitable screws, which could be a pain if you don't have a spares box! Other than that, fitted it in less than 15 minutes with little drama. Very quiet and effective motor unit, with fan and fixing nut included
  • Bought to fit a Leisure Rangemaster 90D

    • 1.0 out of 5
    • 2.0 out of 5
    • 4.0 out of 5
    • 2.0 out of 5

    By - Maidenhead

    The item was selected using the criteria on the web site. It had to be altered slightly to fit from the back, which was not a problem. However when I went to the front of the oven to fit the fan the shaft was too short. Obviously as I had altered the unit I could not return it.
  • Not perfect but hey....

    • 5.0 out of 5
    • 4.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Devon

    It is a universal so was never going to be totally painless - I had to cut down some mounting bolts to avoid fouling the screws fitting the pillars to the oven. But that said it was easy. The video made it much more certain what to expect, big plus and huge kudos to e-spares for that. What WAS surprising was the delivery, ordered Sunday, dispatched Sunday, arrived Tuesday - come on guys give your staff some downtime. Amazing. This is the second or third time I've used E-Spares and to be honest they are a hidden gem. I kept the card with their details on but I normally forget and so Amazon is their friend here, popping them up high in the page rank - deservedly so.

Ask & Answer

(37 Questions and 37 Answers) Ask a question
  • Q I am unable to release the nut that holds the fan in place. 2 Answers

    I am aware that it is opposite thread but the oven has been in use for 10 years or so, is there a particular method for releasing this nut. Not sure about using WD40 in the oven as the smell would linger.

    By Anonymous - Liverpool - 03 April 2012

    • A
      It doesn't matter ,as if your changing the whole fan assembly you don't need any of the old fan,,) and wd40 is fine to use ,but clean off all parts left in oven ,

      By Tricky trev g - Southampton Eastleigh area - 06 July 2013

    • A
      I've just removed mine from my cooker thats been used every day for more than ten years. You are right to unscrew the nut by turning clock wise(this is opposite to normal).Hold the fan blade with one hand - maybe with a glove on and using a 10mm spanner undo the nut, it does not matter if you have to use excessive force or even shear the fan motor spindle as obviously you are removing the fan blade to replace the fan motor i presume.

      By Bert - Norfolk - 24 April 2012

  • Q When i turn the oven on there is a delay thats getting longer before the fan starts. Does this mean it needs replacing? 2 Answers

    By Ann - Northampton - 15 September 2011

    • A
      A Slower and slower start for the fan was symptomatic of the need for a new one. But beware - the element relies on the airflow to cool it Left un cooled it will eventually blow , as mine did , resulting in another 20 quid down the pan. Change the fan now and you might be lucky.

      By spanners - merseyside - 16 December 2011

    • A
      Sounds like you mighht have a loose conection or it on its way out. I would just wait till it packs in or open up back and check all spade conectors if it is not to much hastle for yourself

      By mikey - glasgow - 21 September 2011

  • Q Does this motor fit a Lincat EC08 oven, thanks 1 Answer

    By Jim - porthsmouth - 01 November 2014

    • A
      Universal parts can be used on many Appliances but may fit slightly differently to the original. Where possible we recommend using the original part unless you have checked the dimensions match and can make minor modifications if required.

      By Chris eSpares Staff - 03 November 2014

  • Q My oven heats up when i turn it on, but the thermostat clicks off only after being on for a couple of minutes, the fan is also slow and stops turning completely when the thermostat clicks off. Not sure if need a new thermostat or fan?? 1 Answer

    By Helen - Leicester - 28 October 2014

    • A
      Replace the fan motor first as if the heat is not being correctly spread around then the oven may cut out. Make sure this motor matches your one before ordering.

      By Chris eSpares Staff - 29 October 2014

  • Q Which Fan will fit my New World model 444447097 DF91 1 Answer

    By sparky - Worcester - 22 October 2014

    • A
      Universal parts can be used on many Appliances but may fit slightly differently to the original. Where possible we recommend using the original part unless you have checked the dimensions match and can make minor modifications if required.

      By Chris eSpares Staff - 24 October 2014