Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Universal Fan Oven Motor 220/240V Stock Number: ES1331607

Universal Fan Oven Motor 220/240V - ES1331607
View video

4.5 out of 5 Rated 4.5 out of 5(522 customers)

High quality spare part for select models of ovens with specific dimensions

Read more

Will this part fit my Appliance?

This product is compatible with:

  • Cookers & Hobs - ensure the dimensions of your motor match the description

High Quality Replacement Fan Oven Motor 220/240V 

A defective fan motor could be the reason for hot air not being distributed correctly within your oven. If the food is no longer being cooked evenly throughout, there may be a problem with the motor. Well you needn't worry anymore, eSpares has the perfect part for this problem. Here we have a genuine Hotpoint replacement fan motor, which will get your oven back to 100%. The fan will be rotating once again to ensure your food is cooked to perfection!


  • 220 / 240 Volts
  • 50HZ
  • 32 Watts
  • 60 Hz
  • Diameter of motor mounting plate: 130mm
  • Depth of motor and mounting plate: 60mm
  • Length of spindle between mounting plate and fan blade: 30mm
  • Diameter of fan blade: 150mm
  • Depth of fan blade: 22mm
  • Note: Not supplied with mounting screws (these may be different to your originals depending on appliance)


Please check the dimensions and the specifications match those of your original fan motor to be sure it will fit your oven. Specifications can usually be found printed on the original motor.


Write a review

Here’s what other people are saying about Universal Fan Oven Motor 220/240V.

(522 reviews)

4.5 out of 5

Ease of fitting 4 out of 5
Quality 4 out of 5
Value 4 out of 5
  • Nottinghamshire
    4.0 out of 5

    Easily fitted by a novice

    Slightly different from the original item, but easy to fit & works a treat. The fitting video was very helpful too

    Ease of fitting 4.0 out of 5
    Quality 4.0 out of 5
    Value 4.0 out of 5
  • Castle Donigton
    5.0 out of 5

    Just what I wanted

    I ordered this fan for my Belling range oven it fitted fine,it worked well and got my oven back in use

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Oxfordshire
    4.0 out of 5

    Fine after a little headscratching

    Fitted to a Hotpoint Ultima. For those who are tackling this make/model using this option you need to be aware of the following: 1. When you remove your old fan, be very careful not to damage the heat protective membrane that fits between the fan and the oven wall. It is extremely fragile. 2. The fan shaft for this is approximately 10mm longer than the Hotpoint one you're replacing. This can be overcome by sourcing 4 longer screws and spacers to re-fit the internal vent wall. I used M3 washers to a depth of 15mm and some screws I had in the garage that fit nicely. This is a very easy job all in all and the oven is as good as new again. Good option for a Hotpoint as long as you're ready for the slight spacing issue.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

67 Questions and 67 Answers

I am aware that it is opposite thread but the oven has been in use for 10 years or so, is there a particular method for releasing this nut. Not sure about using WD40 in the oven as the smell would linger.

By Anonymous - Liverpool - 03 April 2012
  • I struggled with removing the fan blade from my NEFF oven. 10mm nut came off ok using socket set and just holding the blade in position with my hand, problem was then removing the additional shaped washer and the blade itself. Found that gripping the threaded end with some mole grips and them rotating the blade by hand did the trick, although I had to work at it. By John - Staffordshire - 18 May 2015
  • It doesn't matter ,as if your changing the whole fan assembly you don't need any of the old fan,,) and wd40 is fine to use ,but clean off all parts left in oven , By Tricky trev g - Southampton Eastleigh area - 06 July 2013
  • I've just removed mine from my cooker thats been used every day for more than ten years. You are right to unscrew the nut by turning clock wise(this is opposite to normal).Hold the fan blade with one hand - maybe with a glove on and using a 10mm spanner undo the nut, it does not matter if you have to use excessive force or even shear the fan motor spindle as obviously you are removing the fan blade to replace the fan motor i presume. By Bert - Norfolk - 24 April 2012
Answer this question
By Ann - Northampton - 15 September 2011
  • A Slower and slower start for the fan was symptomatic of the need for a new one. But beware - the element relies on the airflow to cool it Left un cooled it will eventually blow , as mine did , resulting in another 20 quid down the pan. Change the fan now and you might be lucky. By spanners - merseyside - 16 December 2011
  • Sounds like you mighht have a loose conection or it on its way out. I would just wait till it packs in or open up back and check all spade conectors if it is not to much hastle for yourself By mikey - glasgow - 21 September 2011
Answer this question

Hi I have a Kenwood CK304FS. The two plastic connectors to the fan motor have broken off. I am presuming I need a new complete fan. Will this item be suitable?

By A Kanji - liverpool - 24 April 2017
  • Dean from eSpares
    Dean at eSpares says...

    This universal fan will only fit depending on the size of your original fan with details on our website, the correct fan for your model is stock number ES1067680.

Answer this question

I changed the fan on my oven and followed all the instructions as guided but when I turn it on its works but its a lot louder than it was originally! does this mean its been fitted wrong? when the cooling fan is on its quite quiet and smooth but when the main fan comes on its noisy! any suggestions?

By AG - Essex - 28 February 2017
  • Chris from eSpares
    Chris at eSpares says...

    Remove the racks temporary as these can rattle with the vibration and check the fan is not catching on anything.

Answer this question

We took the oven out of it place to look for the model number. Since returning to it's place the fan no longer comes on, the light for the fan oven does not light up and it does not work at all. Will replacing the fan and motor include temperature control (thermostat)? How does the thermostat work on a fan assisted oven? Where is the sensor?

By Dinie Brady - Rotorua - 16 February 2017
  • Chris from eSpares
    Chris at eSpares says...

    The oven will not run until the timer is set.

Answer this question
See all questions and answers
Order within 12AM for UK Next Day Delivery