- With Appropriate Dimensions (Please See The Description)
Universal Cooker Hood Filter Kit
Your kitchen cooker hood extractor fan processes some tough grease and grime - replace your filters regularly to keep it running smoothly. This filter kit is for 60cm models of cooker hood. These filters are cut-to-size to fit your cooker hood with precision.
1x striped grease filter measuring 114 x 47cm (cut this in half to make 2 grease filters)
1x charcoal filter measuring 57 x 47cm
Instructions for use:
Remove cooker hood grid
Cut new grease filter to size with the black stripes facing inward
Cut charcoal filter to size and lay it behind the grease filter (on the inside)
Put grid back in place
Tip: When removing the old filters wear disposable gloves and have degreaser to hand. This can be a messy job
Top tips on maintaining your cooker hood:
Always use a grease filter, whether it's for recirculating or ducting fumes. This ensures your cooker hood and kitchen is free from grease contamination.
In summer, it's best (if possible) to duct the fumes to the outside air. Remove the charcoal filter when doing this.
In winter, to avoid losing warm air, use the cooker hood in the recirculating mode. Re-fit the charcoal filter to prevent cooking smells being blown back into the kitchen.
NEVER use filters after they have ceased to function efficiently.
CHANGE your filters when the stripes become visible. This means the filter has reached saturation and is no longer useful.
Manufacturers’ names and numbers are used for reference purposes only. This part is in no way associated with the original manufacturer's part
How to replace a Neff cooker hood filter and lamp
This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.
Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.
QCan the carbon and grease filter be fitted together in hood, i.e. on top of each other3 Answers
I have a Hotpoint HTN40 Cooker hood
By Ali- Cheltenham
- 08 September 2010
you dont need carbon with a cooker hood that extracts to the outside. You only need a carbon when you have a recirculating cooker hood. e.g. do you have a grill on the outside of the kitchen wall for the fan?
By Russell- cumbria
- 21 July 2015
Yes I always put both filters in together. When you have a fry up for the family check the filters - these are cheap enough to change before they get too blocked.
By Trisha T- Clacton on Sea
- 30 July 2013
I would say yes, our cooker hood came with both installed.
QMy Neff hood has a metal filter, when cooking grease goes through the filter and into the motor from there it drips back down onto the rear face of the filter. Would this additional filter cure the problem?1 Answer
By Tony- Lancashire
- 12 July 2015
If your hood is recycling the air instead of venting outside then it should have carbon filters attached to the motor. It would be more effective to replace these than trying to fit this filter as your appliance is not likely to be designed for this.