Bosch Lamp Cover Remover Tool

Stock Number: ES1123507

Manufactured by Bosch

In Stock Available for immediate despatch

Rated 4.4 out of 5 (265 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance?

This product is compatible with:

  • Bosch Cookers & Hobs
  • Neff Cookers & Hobs
  • Siemens Cookers & Hobs


Removing the cover on an oven light fixture can be quite tricky. Our customers have asked that we carry a tool to help in the removal of that tricky cover, and here it is!

Genuine tool to remove the cover on most Bosch, Neff and Siemens cookers.

More product images

Product Reviews

Rated 4.4 out of 5 (265 customers)
Write a review
  • tool for removing oven light cover

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - n.ireland

    Having tried for very long time to try to replace bulb in my neff oven which i was never able to get glass cover off at long last i now have a new bulb in my oven and can now see what is cooking inside and all thanks to my purchase of espares Lamp Cover Remover Tool. Am so glad that i spotted this on espares web page best purchase in a long time.
  • Worth EVERY penny

    • 5.0 out of 5
    • 5.0 out of 5
    • 4.0 out of 5
    • 5.0 out of 5

    By - Luton

    This simple tool saves so much time and hassle. I should have got one a long time ago !!!!
  • Tools

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - PRESTON

    Just as described, the job was not possible without this tool. I had tried three times on three occasions to loosen the the bulb cover without success. It took just 30 seconds with this tool!

Ask & Answer

(8 Questions and 10 Answers) Ask a question
  • Q How do I get bulb cover off even with the gadget just purchased 3 Answers

    The Lamp Cover remover tool has just been delivered. Neither of us are able to turn it and remove cover. Is there a technique/trick to this? Thank you.

    By Gadgetmad - Reading - 15 December 2012

    • A
      I tried first by hand no go ,so I put on a pair of rubber gloves no problem the cover unscrewed without difficulty PS the oven was only 6 months old I am now going to look for a better designed bulb with an improved filament

      By Tomfitz - Bristol - 15 October 2013

    • A
      Hi Gadgetmad. When the oven is cold, Play the hot air from a hair dryer over the glass surface for a few minutes. Start off on a low heat first. This should expand the glass cover a little to release the bond. This tip is a bit late as I have just seen your post.

      By Joseph - 25 February 2013

    • A
      I just bought one of these gizmos before Xmas and it did the trick immediately. No messing. Worked first time. You have to line up the 'fins' on the glass cover to the recesses in the gizmo. It is quite a secure fit when you get it on. It should just slide on and a sharp twist ANTI clockwise should do it. Make sure you are turning it to the left as you look at the light. Perhaps the glass housing is stuck on with oven / cooking deposits? Try some oven cleaner to free it perhaps? Good luck.

      By Anonymous - Somerset - 08 January 2013

  • Q Oven light glass compatibility for Neff B46E74N0GB? 1 Answer

    The glass cover for the top light in my oven has cracked in half. Half the glass and the entire screw fit is still in the oven. This tool, and elsewhere the replacement glass pairing to go with it, looks about right as a replacement set but checking the E-no. gives me an incompatible message. Is there an alternative part for the glass cover? Or is the "incompatible" assessment perhaps wrong in this case?

    By Anonymous - East Midlands - 28 October 2014

    • A
      The reason why our model checker advises it is not compatible is there are no models listed for this part. This should fit all models with this style lamp cover. The tool will not help remove the old glass, turn the power off and try wedging a cloth into the holder on the handle of a screwdriver to apply pressure and remove it. Remember to use gloves and safety glasses to avoid injury.

      By Chris eSpares Staff - 29 October 2014

  • Q I have just received the lamp cover removing tool. However, I just cannot get the lamp cover to budge, despite heating it first with a hair drier. The cover has 4 fins. The lamp is in the top back corner, so access is somewhat limited. Any ideas? 1 Answer

    By vim - Norfolk - 24 October 2014

    • A
      Warm the oven for 10 minutes on 200c and allow to cool until you can touch the lamp. Then try using the tool to first slightly tighten then loosen the cover. If this fails carefully spray around the glass with WD40 and allow to penetrate before retrying to remove it.

      By Chris eSpares Staff - 24 October 2014

  • Q Will this tool fit a Beko lamp cover, cooker model number Beko BDVC563AK_BK ? 1 Answer

    I'm trying to find out if this lamp cover remover tool would fit the above Beko cooker? I've measured the diameter of the bulb cover and it's 3.9 cm.

    By Linda - East Ayrshire - 31 August 2014

    • A
      This is specifically for ovens from Bosch or Neff and is unlikely to fit onto your light.

      By Chris eSpares Staff - 01 September 2014

  • Q Will this fit a Neff oven lamp cover for the following type of oven? 1 Answer

    E-Nr. U14M62N0GB/01 FD 9002 000179

    By Jovac - Portsmouth - 25 April 2014

    • A
      We believe this tool fits the lens on your oven lamp.

      By Chris eSpares Staff - 25 April 2014