Skip to main content

Call eSpares 0844 9777 888 (7p per min + any network access charge)

Main fan Oven Ring Element 2000W Stock Number: ES1116456

Main fan Oven Ring Element 2000W - ES1116456
View video

4.9 out of 5 Rated 4.9 out of 5(76 customers)

High quality compatible spare part for select models of AEG, Electrolux, John Lewis, Moffat and Zanussi ovens

Read more

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

High Quality Compatible Main Oven Ring Element 2000W

If the ring element for your oven is causing you problems, you should let eSpares take over. This compatible spare element could be the ideal replacement that will soon have your old oven working like new. You'll be cooking great meals at your convenience again in no time.

Specification:
  • 3 Turn
  • 2000 watts
  • Height: 253 (mm)
  • Width 198 mm
  • Bracket : 70 mm
  • Tags: 24 mm
 
Compatible spare part suitable for select models of AEG, Electrolux, Firenzi, John Lewis, Moffat, Tricity Bendix and Zanussi ovens.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

 

Write a review

Here’s what other people are saying about Main fan Oven Ring Element 2000W.

(76 reviews)

4.9 out of 5

Ease of fitting 4 out of 5
Quality 4 out of 5
Value 4 out of 5
  • huddersfield
    5.0 out of 5

    it fitted and worked.

    it is a good bit o' kit ,could o' been cheaper :-)

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 3.0 out of 5
  • 5.0 out of 5

    A life saver

    Relatives visiting from overseas is not a good time for the oven to stop working. Thanks to a great service from Espares I repaired the oven.

    Ease of fitting 5.0 out of 5
    Quality 3.0 out of 5
    Value 4.0 out of 5
  • Cambridgeshire
    5.0 out of 5

    Good product but I wish I

    I have a John Lewis JLBIOS603 and 2 elements are shown as compatible with this oven. The ES1005463 and this one. I couldn't see any difference between them so I bought the cheaper of the 2, figuring that they were the same product from different manufacturers. The element was at a good price and turned up quickly. But I didn't look at the pictures hard enough nor did I pull the old element out to look at it. Dumb move on my part. It turns out that they have different mountings. This one has an earthing tab between the 2 terminals and 2 holes on the outside. The other one has a single hole where the earthing tab is on this one and no earthing tab at all. If you zoom in it is easy to see. I'm guessing that my oven has changed over the years and some variants use one and other variants use the other? Upshot was that the new element wouldn't fit :-( A few minutes out in the shed and the earthing tab had been snapped off and a 5mm hole drilled in the right place and it went in no problems and works fine. It would have been nice however if the "Full Product Details" had highlighted that there are different mounting variants and prompted me to dig a little deeper before ordering. However, I don't doubt that the element would have been swapped over if I had mentioned that it was the wrong one. For me, it was quicker and easier to work around my mistake and it all turned out good in the end :-)

    Response by Chris on 08 Apr 2016 eSpares Staff

    Sorry you had problems with your element, as you say there is likely to have been production changes and with the right product code we would have been able to identify the correct one. As these elements are likely to fit a number of ovens we cannot update the product information to cover all variants so can only give the general advice of 'Please check the list of suitable models to ensure that this spare part will fit your appliance'. As you say we would have happily changed this in the event of a part incorrectly ordered.
    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

4 Questions and 5 Answers

By shelley75 - - 09 January 2010
  • The answer is in the title 2000 watt main oven element.... By Anonymous - Great Britain - 06 June 2013
  • eSparesToby from eSpares
    eSparesToby at eSpares says...

    Unfortunately we don't have that information, however this is made for specific models. It will be the same wattage as the one currently in your appliance. Please check the 'Models This Part Fits' section before purchasing.

Answer this question

Hi I removed the element from the oven, the live and neutral was connected but there is no earth to be seen. ? What happens next?

By simon torr - Salisbury - 23 April 2016
  • Chris from eSpares
    Chris at eSpares says...

    The element will earth through the connecting bolts and on many ovens will not have a separate earth connection.

Answer this question
By Anonymous - South Wales - 20 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    A part is only listed as compatible when we have been notified it will fit a specific model. It may indeed be the correct part for your appliance but we cannot confirm this at this time. If it proves unsuitable we will of course accept the return of the part (subject to our conditions).

Answer this question

Unsure what to do with middle connector

By stuart - london - 08 May 2014
  • Chris from eSpares
    Chris at eSpares says...

    The two outer connections are used the third in the middle is an earth connection, this is not required as the element earths through the screws to the cavity.

Answer this question