If your fan oven's element has finally given up and left you with a cold oven, eSpares can soon help you out. This genuine spare element from Electrolux could be the part to provide you with a fully functional, hot oven once again. No more takeaways necessary!
Also Known As: Circular Element, Round Element
Height: 220 (mm)
Width 192 mm
Bracket : 140 mm
Tags: 95 mm
Genuine spare part suitable for select models of AEG, Electrolux, John Lewis, Tricity Bendix and Zanussi ovens.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
How to replace an oven element
This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.
Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.
QI have a double oven its overheating ie. I set the temp. to 150 it heats to max temp whilst displaying it is at 150 this is true for both top and bottom oven is it the regulator I need I changed the fan in the main oven last year?1 Answer
By charlie- Ireland
- 22 November 2013
The oven should have different thermostats for the top and bottom ovens and it would be unusual for both to fail at the same type. If yours is controlled 'electronically' it is likely to have a common control panel, this may be the cause.
My EOU43002X has tripped the electric a few times when you switch it on, then yesterday, It had been on for about 2 hours (cooking a roast) then all of a sudden the RCD tripped for all the sockets. I reset the RCD and everything looked fine, I went to check the Meat about 30 mins later and found that there was no heat in the Main oven. I'm assumming it's the element but wondered if it could be the thermostat instead. Any ideas would be good before I go buying lots of parts. The oven is only about 20 months old.
The top oven/grill is still working fine.
By Anonymous- Somerset
- 23 January 2011
Hi there. It sounds very much like something in the element shorted, and therefore caused the fuse to trip. I'd say it's most likely that you'll need to replace the element.