Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Zanussi Washing Machine Heater Element - 1950 Watt Stock Number: ES1075038

Zanussi Washing Machine Heater Element - 1950 Watt - ES1075038
View video

4.7 out of 5 Rated 4.7 out of 5(15 customers)

Genuine spare part for select AEG, Electrolux, John Lewis, Tricity Bendix and Zanussi washing machines

Read more

Manufactured by Electrolux

(This part fits select Zanussi models)

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Washing Machine Heater Element - 1950 Watt

If your washing machine isn't heating the water as well as it should be, perhaps your heater element is causing the problem. If so, we could have the part for you!


  • 1950 Watts

Genuine spare part for select AEG, Electrolux, John Lewis, Tricity Bendix and Zanussi washing machines. 

Please see the model fit list to ensure compatibility with your appliance. 

Write a review

Here’s what other people are saying about Zanussi Washing Machine Heater Element - 1950 Watt.

(15 reviews)

4.7 out of 5

Ease of fitting 5 out of 5
Quality 4 out of 5
Value 4 out of 5
  • 5.0 out of 5

    Fantastic Service

    Ordered on a Sunday, arrived Tuesday. Watched the fitting video and the washing machine was back up and running. Saved hundreds of pounds by not having to buy a new washing machine :-)

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Salisbury
    5.0 out of 5

    Perfect Heating Element for my Washing Machine

    After much research ESpares website was able to point me to the exact replacement heating element I required for my John Lewis washing machine. While not particularly cheap it was good value as it was of excellent quality and complete with replacement thermostat. What was most useful were the two videos showing how to replace the element both for a front fitting and a rear fitting, the latter being much simpler. Fortunately I removed the back of the machine before ordering and found that it was a rear fitting. Following the video was simple and, although badly corroded, the old element was reasonably easy to carefully prise out. Smearing the new seal with washing up liquid was a good tip and the new element slid easily into place. There is a clip to fit it into. Make sure you remember the wiring connections. However they are not complicated. A very good purchase which saved me an expensive call out.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
  • ENGLAND not britain.......
    3.0 out of 5

    Elementary - I bought an element 16 months ago.

    We are just two Married people and a Mother in Law so a washer element should have a long life with us but the last one from espares only lasted 16 months.. The element is easy to replace if you are reasonably athletic so I bought another washer element from espares. This time I paid 50% more for an approved replacement part thinking it would be of better quality but when I compared the two elements they looked to be of a totally identical type so I presume that in 16 months from now??? I must state that the chances are that I will be looking elsewhere for an element that is if we do not buy a new washer. I can get a cheap £0? element of an identical pattern fto the ones I have bought for £000? and £0000? from somewhere else.... Why pay through the nose for an approved element when they are all being made to work only until the 1 year guarantee runs out!

    Ease of fitting 5.0 out of 5
    Quality 3.0 out of 5
    Value 3.0 out of 5
See all reviews
Ask a Question

1 Question and 1 Answer

I have checked the heater element and get electrical continuity but there is another connection on the face plate, I assume that it is a thermistor but I do not get any continuity. Is this correct. If it needs the control board then the price will right the machine off.

By Colin Dance - Trowbridge, Wilts.. - 30 July 2015
  • Chris from eSpares
    Chris at eSpares says...

    The grey connector to the one side of the heater in a NTC temperature sensor and will have a higher resistance of typically between 2000 and 4000 ohms so will not show on the low resistance range of a meter.

Answer this question
Order within 12AM for UK Next Day Delivery