Electrolux Cooker Hood Carbon Filter Stock Number: ES1066276
Will this part fit my Appliance?
Cooker Hood Carbon Filter
Your cooker hood's charcoal filter is responsible for trapping food odours and grease, and re-circulating fresh air. Replace your carbon filter regularly to keep your extractor fan working its magic. It is recommended to change your carbon filters every 6 months (or when the filter is heavily soiled).
- 233 (D) × 34 (H) mm
- Sold individually
Genuine part for select Electrolux, Zanussi and Tricity Bendix extractor fans. Please see the list of appliances before purchase to ensure this is the right part for your model.
Please note: This part is PNC (product number) dependent, prior to ordering please check that your model and PNC are listed under the list of appliances.
10 Questions and 10 Answers
Model ZAMUSSI ZBW965 nUMBER 940429586
Chris at eSpares says...
You will have to open the hood by removing the grill in a similar way to that shown in the video. Inside you will see the motor assembly with the carbon filters fitted on either side (unless it vents outside and they are not fitted). To remove the filters you normally rotate them to unlatch and lift off.
i have been told to pull the clips over on either side and the top should come over and makeing acess but it dosn't come over at all i have had this hood for about 10years
- On mine theres a disc in the middle of the filter you just unscrew, replace with new 1 & rescrew in the disc
- Slide in tabs each side to drop down cooker hood, hinged at back, with fabric filter fitted underneath. The carbon filter is exposed and is situated in the centre of the hood. Turn the round plastic centre anti clockwise to release the old filter. Do the same in reverse to fit the new filter.
eSparesMalindi at eSpares says...
Please contact a technician for support because we cannot give technical advice unfortunately.