Hygena Cooker Hood Light and Switch PCB (Printed Circuit Board) Assembly

Stock Number: ES1060962

Manufactured by Hygena

In Stock Available for immediate despatch

Rated 4.5 out of 5 (160 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance? [?]

Click on your brand to check if this part fits your appliance

Diplomat Cooker Hoods Hygena Cooker Hoods


This extractor fan light and switch PCB assembly is a genuine Hygena spare part. 

  • Features four buttons - one for the light and three buttons to control the speed.

As eSpares customer reviewers have noted; this item requires a bit of soldering to fit. If you haven't got one already, why not add a soldering kit to your eSpares order?

More product images

Product Reviews

Rated 4.5 out of 5 (160 customers)
Write a review
  • Fitting tip

    • 4.0 out of 5
    • 3.0 out of 5
    • 4.0 out of 5
    • 3.0 out of 5

    By - Reading

    If you don't have 3 hands for the soldering here is a tip: cut off a length of the flux and hook it onto the button holes of the extractor hood.
  • Does the job but...

    • 4.0 out of 5
    • 2.0 out of 5
    • 3.0 out of 5
    • 4.0 out of 5

    By - West Midlands

    Not the easiest thing to replace as the cable connections all require soldering and without dismantling the whole cooker hood you have to hold the circuit board in mid air to solder the connections. However as long as you have three hands and make a note of the location of the 8 coloured cables before you start you should be ok. All working fine now and cheaper than buying a whole new cooker hood unit.
  • Brilliant service

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 4.0 out of 5

    By - Bath

    Why pay to have it repaired when you can do it yourself. Brilliant service as always. Well recommended.

Ask & Answer

(7 Questions and 10 Answers) Ask a question
  • Q how are the chrome buttons replaced? 3 Answers

    By sigi - 05 December 2009

    • A
      you have to reuse your old buttons by simply pulling them off the old p c b and pushing them on to your new switches they are a tight fit so be careful not to break them.

      By 2magpies - Derbyshire - 24 April 2010

    • A
      Pull off from the other unit and place onto the new unit

      By Oliver247 - Kent - 02 March 2010

    • A
      the chrome buttons just pull off the original with a careful pull and they push onto the new one easily

      By Anonymous - london - 16 December 2009

  • Q does this come complete with on/off buttons? 2 Answers

    By yiddo - 02 November 2008

    • A
      The silver buttons are not included. You need to take them off the old unit and push them on the new one. Easiest bit of the job.

      By Oliver247 - Kent - 02 March 2010

    • A
      Hi Yiddo With this part there are four switches. One for the lamp and three for speed (the lowest one incorporating on/off). I hope this helps!

      By Rory eSpares Staff - 14 November 2008

  • Q Where do I get a wiring diagram from? 1 Answer

    By Taff - Pembroke Dock - 13 November 2014

    • A
      Sorry but we do not have access to this information.

      By Chris eSpares Staff - 14 November 2014

  • Q APP 2420 Stoves Cooker Hood 1 Answer

    My cooker hood fan has stopped. The lights on the hood operate OK when I press the specific switch button. The other switches for the cooker fan do not produce a result. And the small red indicator light on the switch panel does not illuminate. I know this is guesswork, does the switch tend to fail more readily or could it be the fan motor. I suspect the switch mainly because the red indicator light will no longer illuminate regardless of whether the lights or the fan switches are pressed.

    By Anonymous - Gloucester - 02 August 2014

    • A
      Your fault description does tend to suggest the problem is likely to be the switch rather than the motor.

      By Chris eSpares Staff - 04 August 2014

  • Q Diplomat app2420 1 Answer

    Motor does not work. Red indictor light is also out. Other lights OK. IS it the motor?

    By William - Newcastle upon Tyne - 26 January 2014

    • A
      The motor failing would not on its own cause the indicator to stop working. It is more likely to be a fault with the pcb.

      By Chris eSpares Staff - 03 February 2014