Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

High Quality Compatible Main Oven Fan Motor for R561ER Stock Number: ES1029461

High Quality Compatible Main Oven Fan Motor for R561ER - ES1029461
View video

4.7 out of 5 Rated 4.7 out of 5(64 customers)

High quality compatible spare part for select models of Indesit, Hotpoint, Creda and Belling cookers

Read more

Will this part fit my Appliance?

Yes

This part is compatible with Creda R561ER Cookers & Hobs.

Not what you're looking for?
See all parts for your appliance.

High Quality Replacement Main Oven Fan Motor

If your cooker is failing to start up there could be a fault with the motor. No worries, eSpares may have just the part to solve the problem. This compatible spare motor can soon be fitted to get your oven performing like new. Making great meals doesn't have to be a chore anymore!

Specification:

  • 220 / 240V
  • 50HZ
  • 32W
  • Diameter of motor mounting plate: 130mm
  • Depth of motor and mounting plate: 60mm
  • Length of spindle between mounting plate and fan blade: 20mm
  • Diameter of fan blade: 150mm
  • Depth of fan blade: 22mm

 

High quality compatible spare part for select models of Indesit, Hotpoint, Creda and Belling cookers.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Write a review

Here’s what other people are saying about High Quality Compatible Main Oven Fan Motor for R561ER.

(64 reviews)

4.7 out of 5

Ease of fitting 3 out of 5
Quality 4 out of 5
Value 4 out of 5
  • Worcestershire
    5.0 out of 5

    So Proud I Fitted It Myself

    Bought a replacement oven fan for a integrated Hotpoint BU82 not thinking what i was letting myself in for. Not being a "handy man" id previously replaced the element thinking it was easy so thought what can be hard about replacing the fan .. what a surprise it was. I knew the fan was showing inside the oven and having previously taken off the element made it quickly into the oven after i had turned off the fuse at the mains electric. I took off the back panel and remove the fan only to find the fan motor was no where in sight. After a quick google it became clear the motor was at the back of the oven, something i was now dreading as i wasn't a "handy man" and had only really changed a light fitting so it was a bit over my head. However i knew id give it a try and if all else failed id have to buy a new oven. Removing the oven from the kitchen unit was easy with just a few screws and i soon had the oven on the floor. Removed the back panel with ease to show the motor. Taking a quick photo of all the wires and cables i was ready to remove it so i had it in my hand. This is when it became apparent the replacement was slightly different in shape but i soon had it figured what went where. The fittings to the motor were horizontal not vertical and there was only 1 side connector not two but It was put back in place quickly, connected up and before i put the back panel on i turned on the fuse and tried it. To my amazement i had done it and the fan was spinning. Popped the back on, the insides went back on and with a little help form my son soon had the oven back in place. Job well done if i do say so myself

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • 2.0 out of 5

    Needs work to fit

    The spindle is far too long. I tried to pack the fan cover out with washers to clear the fan but the gap was too big. In the end I re-used the old fan on the new motor as it was smaller than the new one but also had to bend the fan blades back so the cover would fit.

    Ease of fitting 2.0 out of 5
    Quality 4.0 out of 5
    Value 3.0 out of 5
  • Manchester
    3.0 out of 5

    Not compatible

    Well, it was a motor with the right position for the mounting screws, However, the spindle is way too long and I had to put the fan blades on backwards and bend them all over the place so they didn't hit the screws and didn't graze the oven's fascia. But, hey, ho, it worked. Not entirely convinced the description of "compatible" really hits the mark!

    Ease of fitting 2.0 out of 5
    Quality 3.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

3 Questions and 3 Answers

By M morgan - Gloucester - 03 October 2016
  • Chris from eSpares
    Chris at eSpares says...

    The motor will only run in one direction even if the live and neutral connections are reversed.

Answer this question
By Anonymous - Burnley - 28 December 2014
  • Chris from eSpares
    Chris at eSpares says...

    Yes it would prevent the hot air being circulated.

Answer this question
By tattyoggie - - 18 October 2009
  • eSparesToby from eSpares
    eSparesToby at eSpares says...

    Unfortunately not although there are plenty of DIY websites with instructions on how to fit parts such as this.

Answer this question
Order within 9PM for UK Next Day Delivery