Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Washing Machine Door Seal Stock Number: ES1019977

Washing Machine Door Seal - ES1019977
View video

4.8 out of 5 Rated 4.8 out of 5(552 customers)

Compatible spare part for select models of Bosch, Neff, and Siemens washing machines

Read more

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Compatible Washing Machine Door Seal

Has the door seal for your washing machine worn out over time? Or if you've damaged it somehow, don't panic - eSpares can soon help you out. This compatible spare door seal could be just what you're after to get your old washer back in action. You'll soon be able to use your washing machine with the confidence that leaks will be avoided by using a brand new seal - you will be enjoying fresh, clean clothes again before you know it!

Compatible spare part suitable for select models of Bosch, Neff and Siemens washing machines.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Write a review

Here’s what other people are saying about Washing Machine Door Seal.

(552 reviews)

4.8 out of 5

Ease of fitting 4 out of 5
Quality 4 out of 5
Value 4 out of 5
  • Hampshire
    3.0 out of 5

    Good but Not excellent

    I bought this exact replacement 14 months ago and it has now split, so I have bought another one which I hope will last longer. Good price about 25% of a genuine replacement part . Did not want to spend too much as the machine is getting on a bit. Pays your money and make your choice

    Ease of fitting 5.0 out of 5
    Quality 3.0 out of 5
    Value 4.0 out of 5
  • Rugby
    5.0 out of 5

    Easy to fit, great value seal

    Using the eSpares 'how to' video, even a doofus like me managed do this... with some assistance from my better half and few swear words along the way! Not sure why you need to spend a lot more on the genuine Bosch seal - this alternative is perfectly fine.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Bracknell
    5.0 out of 5

    Great value

    Didn't think I would be able to do this but managed in the end. Video was invaluable but not quite as easy as it looked. Product was excellent and very good value. Delivery excellent arrived next day with only standard delivery. Hooray for eSpares

    Ease of fitting 3.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

17 Questions and 24 Answers

By goodsy - solihull / birmingham - 20 February 2011
  • Hi All. Just wondering. By the time the original door seal has begun to fail it might be a good idea to check the wear state of the motor brushes. The motor brushes on my 1250 machine gave warnings before the drum stopped for good. First warning was an odd intermittent grating noise similar to when someone engages gears badly in a car ( brush tips bouncing off the rotor ). Next was intermittent stopping part way through a wash cycle. Finally.... no rotation at all. Check the brushes are not worn close to failure point. Hope this helps Guys. By FrankM - - 04 March 2016
  • Hi Rory, I have also had a split door seal and this was then follwed by the machine not spinning, I have now replaced the door seal so what PCB is it I need to order and do you have videos of how to do that. The door seal video was perfect. Thanks. Also I can hear the relay on the control module pcb clicking on and off so do you think that would mean the pcb is ok and maybe the brushes are wet ? By Rich - Glasgow - 07 September 2011
  • Hi Rory, I have also had a split door seal and this was then follwed by the machine not spinning, I have now replaced the door seal so what PCB is it I need to order and do you have videos of how to do that. The door seal video was perfect. Thanks By Rich - Glasgow - 07 September 2011
  • Rory from eSpares
    Rory at eSpares says...

    Hi goodsy, the split seal will be leaking water, which could well have made its way towards electrical components inside the washing machine. I'd advise unplugging and not using again until you're sure everything's ok. It sounds as if the PCB may have been damaged by water leakage. I'd replace this, and replace the seal too.

Answer this question
By ChrisG - Doncaster - 08 May 2014
  • Chris from eSpares
    Chris at eSpares says...

    Re DaveH post. It is unusual for the seal to split as these are synthetic rubber like the manufacturers original. The most likely cause of damage is from something in the wash load like a coin or bra wire.

  • hi, i fitted the cheaper one in may, im back to get the proper one already.... it split under the lower lip. kitchen floor got washed. dave. By daveyh - surrey - 11 August 2014
  • Chris from eSpares
    Chris at eSpares says...

    This seal is a 'compatible' seal and not supplied by Bosch. It should be a direct equivalent and of similar quality to the original seal.

Answer this question

is there any help to guide me to understand how to fit this item?

By mucuko - london - 17 November 2008
  • There is a video on this site, I watched and fitted my seal successfully. By jackums - Runcorn - 04 May 2010
  • The e-spares video is excellent - watch and listen carefully - you will need an extra pair of hands, just as the video explains. By borderer - Jedburgh - 16 February 2010
  • Samara from eSpares
    Samara at eSpares says...

    Hi Mucuko, We do indeed have fitting instructions for the washing machine door seal. They can be found here:

Answer this question
By AG - Berkshire - 12 January 2017
  • Chris from eSpares
    Chris at eSpares says...

    The drain holes should be at the bottom as shown in the attached video at 3:30. If the seal is fitted over the lip on the drum the gap between seal and tub will be correct and it will not leak.

Answer this question
By KC - Hull - 30 January 2016
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: Alternatively please copy and paste this link into your web browser.

Answer this question
See all questions and answers
Order within 12AM for UK Next Day Delivery