Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Fan Oven Circular Element - 2000W Stock Number: ES1019722

Fan Oven Circular Element - 2000W - ES1019722
View video

4.8 out of 5 Rated 4.8 out of 5(465 customers)

High quality replacement part for select models of Whirlpool, Ignis and many more brands of ovens

Read more

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

High Quality Replacement Fan Oven Circular Element - 2000W

Make sure your cooker or oven is heating up correctly by replacing the fan oven element if it no longer functions as it should.

Oven elements fail when the internal element filament burns out, this can cause the element to short circuit. There may be visible signs the element has blown such as a split, bulge, or blow hole on the element. Other signs of a failed element include; the oven not heating up, the oven blowing out cold air or bright spots during use.


  • Wattage:2000W

  • Length: 215mm

  • Width: 190mm

  • Bracket: 70mm

  • Tags: 25mm


Compatible spare part suitable for select models of Whirlpool, Ignis and many more brands of ovens.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Write a review

Here’s what other people are saying about Fan Oven Circular Element - 2000W.

(465 reviews)

4.8 out of 5

Ease of fitting 5 out of 5
Quality 4 out of 5
Value 5 out of 5
  • Barnsley South Yorkshire
    5.0 out of 5

    good quality product

    Very pleased with the product. I hope l can say the same after twelve months of usage. The delivery and tracking was first class. Keep up the good work. I haven't used anyone else since my first purchase from you. I have also been happy with the vast range of spares you can supply.

    Ease of fitting 5.0 out of 5
    Quality 4.0 out of 5
    Value 5.0 out of 5
  • Birmingham
    5.0 out of 5

    Excellent value for money.

    I ordered this element at 7.50 pm and it arrived by courier next day at 11.40 am. Easy to fit and excellent value for money.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Ottringham
    5.0 out of 5

    Did the job

    Watched the video on here purchased installed and its now working great.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

12 Questions and 17 Answers

By Pillpusher - - 05 May 2009
  • Its really super simple, unscrew guard in oven, unscrew the screws holding the element in place and there are 2 electrical clips attached to the element. Carefully pull the clips out one by one and re- attach to the new element, screw back in place and oven is ready to go. By pager1968 - south tyneside - 25 May 2010
  • take to screws on back plate out revealing the element take 2 screws holding it on and take element out taking off the earth and live wire putting these back on new one and reverse op its easy and could save you pounds By jeff3 - neath - 29 April 2010
  • very easy to fit. By washer12 - widnes - 28 April 2010
  • Rory from eSpares
    Rory at eSpares says...

    Hi Pillpusher, attached is a link to a video on how to fit a fan oven element. While the demo is for a different brand, the general process remains very similar. Hope this helps.

Answer this question

I have newly acquired this property and have no instructions for the cooker. The element needs replacing but I cannot find the model number of the cooker anywhere. Would there be a part of the cooker it would be engrained on? It's not on the front as it should be. Please advise. Thanks

By Mebel - - 18 October 2009
  • should be on a sticker on the inside of the oven, open the door and look down the sides, it should be thereabouts (unless it has fallen off). By pager1968 - south tyneside - 25 May 2010
  • Samara from eSpares
    Samara at eSpares says...

    Hi Mebel, Here's our guide to finding your cooker model number, I hope this helps! There are lots of places that the data plate could be hiding.

  • On most ovens the model number is found by dropping down the oven door the number is usually on a small s/steel plate in one of the bottom corners By Anonymous - Krypton - 02 December 2009
Answer this question

Please clarify wattage and measurements (diameter, connections apart distance, screw holes). An earlier reply contradicts with the description in the text. The part number method is not always the best.

By reft - - 20 March 2010
  • the description of the element was perfectly satisfactory these parts are of a standard design and as long as the appliance is listed that you wish to fit it to then size diameter e.t.c does not apply By jwgsam - Lowestoft - 07 June 2010
  • this product is exactly the same size and measurements to one being replaced in a whirlpool fan oven AKZ161/03/1X. Two prong connection very easy to fit. By von71 - Edinburgh - 01 June 2010
Answer this question

I've purchaed a replacement element for my Akp 511 fan oven but I'm not sure which way round the 2 wires were connected to the original element. Can you advise please?

By Gary Close - - 07 June 2016
  • Chris from eSpares
    Chris at eSpares says...

    The two wires to the element can be connected in either position as this will not effect the ovens performance. If there are three the earth wire should be a different colour and should be connected to an earth tag on the element (if fitted).

Answer this question
By HUGH - - 01 April 2015
  • Chris from eSpares
    Chris at eSpares says...

    This is the external dimensions of the measurement.

Answer this question
See all questions and answers
Order within 9PM for UK Next Day Delivery