Compatible 2500 Watt Fan Oven Element

Stock Number: ES1019719

In Stock Available for immediate despatch

Rated 4.8 out of 5 (1015 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance? [?]


Compatible 2500 Watt Fan Oven Element

If your fan oven is not heating up properly the usual culprit is a faulty oven element. This is a replacement spare so be sure to view the model fit list and check the specs, prior to purchase to ensure the spare is correct for you. Once fitted to your oven food can be cooked piping hot once again!


  • 2500 watts
  • Height: 235mm
  • Width: 255mm
  • Bracket: 70mm
  • Tags: 38mm
  • 2 Turn
  • End to centre bracket 220mm

Compatible spare for select Stoves, Belling, Cannon, Creda, Hotpoint and Indesit ovens.

Please check the list of suitable models to ensure that this spare part will fit your appliance.


How to replace an oven element

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.8 out of 5 (1015 customers)
Write a review
  • Great purchase

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Haverhill

    Easy to fit and a fraction of the price a lot cheaper than our usual supplier.
  • good buy

    • 5.0 out of 5
    • 4.0 out of 5
    • 4.0 out of 5
    • 5.0 out of 5

    By - inverness

    element seems like a a very good piece of kit, but only time will tell. easy fit with espares excellent video. saved me a fortune as SHE was going to buy a new cooker!
  • element

    • 5.0 out of 5
    • 5.0 out of 5
    • 4.0 out of 5
    • 5.0 out of 5


    Product works well, and a fraction of the price of the branded type. Fitting was straight forward.

Ask & Answer

(7 Questions and 7 Answers) Ask a question
  • Q i have looked every where you said the serial no should be cant find it 1 Answer

    the cooker is creda carefree circulair not sure of age I have got the broken element out just need a replacement it is spiral inshape 240mm overall and 50mm between spade ends

    By terry - kettering - 25 November 2014

    • A
      To identify your element we would need your full model number. However we have over 50 'compatible' elements listed that may fit many manufacturers appliances but it is important you remove the old element and match it with one of these before ordering as each may have slight differences in fittings or sizes. To view these 'compatible' elements paste this link into your browser:

      By Chris eSpares Staff - 26 November 2014

  • Q My Old element is very difficult to get out there dosent seem to be screws attaching it ? 1 Answer

    By Anonymous - 10 February 2014

    • A
      The element may be fitted using nuts from the back of the oven. Remove the back and locate where the element cones through the lining. carefully part the insulation and you may find the bolt shafts and nuts that hold the element in place.

      By Chris eSpares Staff - 10 February 2014

  • Q Got the oven element out no problem but I can't get the clips to stay on the new one, they keep slipping off. Do you have to tighten them, and if so, how? 1 Answer

    By Tara56 - Glasgow - 04 December 2013

    • A
      We assume the 'clips' you refer to are the electrical connectors to the element. Remove them from the element and gently squeeze them with a pair of pliers and check they now fit tightly. If you accidentally crush them with too much force you will need to replace them. These connectors are available from Maplins or most car accessory stores.

      By Chris eSpares Staff - 04 December 2013

  • Q rcd trips when fan in oven is about to start 1 Answer

    Creda Hotpoint electric oven. Almost every time we use our oven the RCD for the cooker trips as the fan is about to start. This has happened for at least 6 months now. Element used is 2500w as above bought Dec 2010. Any asiistance on how to resolve this very welcome. thanks.

    By Steve - Seaton, Cumbria - 09 November 2011

    • A
      If this has only been the case since you replaced the element are you sure that the wires have gone back in the correct place and are not touching the retaining screw or someother metal part of the cooker.

      By Countryman - East Sussex - 22 November 2011

  • Q do you have the dimensions for ES1019719 1 Answer

    my element is from an ariston cooker 250mm across connectors 50mm apart 2500 watt exact image of above. nothing in ariston looks anything like mine.

    By sark - ashford kent - 25 June 2011

    • A
      The ring is about 250mm diameter. The fixing plate is just inside the element ring. The fixing plate is about 25mm x 60mm with a central fixing hole. The element passes through the fixing plate at 40mm centres.

      By Jerryd - Hampshire - 20 July 2011