Is your oven no longer working properly? Well, if it's turning on but you still find it isn't getting hot, it could be a problem with the heating element. Don't worry though, now you can fix it yourself and save some hard-earned cash with eSpares. This compatible spare element can be installed to ensure your oven is back to its best in no time.
Also Known As: Circular Element, Round Element
Height: 225 (mm)
Width 192 mm
Tags: 92 mm
Compatible spare part suitable for select models of AEG, Electra, Electrolux, Moffat, Parkinson Cowan, Tricity Bendix and Zanussi ovens.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
How to replace an oven element
This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.
Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.
QHow do I remove a rusted screw that prevents me taking off the element cover2 Answers
By Robert Woolcott- Torquay Devon
- 02 March 2015
Also, sharp blow with a hammer to screwdriver end may help. It did with me
By Brian L- Kent.
- 08 August 2015
To remove a rusted screw spray with a releasing fluid like WD40 and find a screwdriver that fits the screw as close as possible. Try to tighten slightly as the screw head will usually be less worn in this direction and may start to turn, then undo if it has moved. If the screw is damaged try gripping with side cutters or pliers across the head and twist with a jerk. If all else fails you may have to drill it out.
QI have replaced the element and its still not working. Do I need to to shop for a new oven?1 Answer
I have a Zanussi ZHF470X I suspected the element had blown so I've changed it. I can now not turn on the bottom oven, neither the LED indicator or fan come on. The top oven and grill work fine so I dont think its a problem with the feed to the unit.
By Anonymous- Telford
- 31 March 2011
Hi there. I'd advise going back and having a look to make sure that the element is fitted and wired correctly - just one slightly loose wire could be to blame.
Qhi could anyone tell me the centers of the contacts and fixing holes? cheers1 Answer
By Dave- london
- 10 January 2011
Just got my old element out of the bin. Centers of the 2 base fixing holes are 128mm apart, the element connectors are 90mm apart. Measurement from center of base plate to center of third fixing point is 125mm. Hope this helps
My oven starts then trips the house fuse, was working perfect until wife cleaned oven, now trips out with in a couple of mins, oven element working, as there is heat, I can not see any other item apart from the element, that could cause the house fuse to trip out, the top oven works perfect, oven approx three years old, gets well used daily, the element looks ok,
- 01 November 2009
have you checked the thermostat, inside the oven top right hand side it could have been damaged during cleaning causing a short and blowing fuse.
I have a Zanussi zce7700x and it all works apart from the fan oven,which has just stopped heating up, it still seems that the fan is blowing cold air around the oven but I just wanted to double check that it is the element I need to buy.?
- 14 October 2009
i wouldsay you definitely needafan oven element as thishas happened to me twice.element is easy to remove and you will probably see then where it has "blown"