Washing Machine Door Seal

Price:£15.75

UK Next Day Available
About delivery

We won't be beaten on price
Price Match Guarantee

Stock Number: ES1019977

In Stock
Available for immediate despatch

4.8/5.0 Rated 4.8 out of 5 (311 customer ratings)

Read all reviews Write a review

enlarge image

Fits the following models [?]

Click on your brand to see the model numbers this part fits.

Description

If the front of your washing machine is leaking, you may need a replacement door seal. Keep your floors dry and your clothes clean with this non-branded spare.

Colour: Grey

Compatible with select Bosch, Neff, and Siemens washers. To find the genuine gasket that's manufactured for your washing machine model, please enter your model number in the search box at the top of the screen.

How to replace a washing machine door seal

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Better than Manufacture by miles
10 May 2013
- Overall Rating 5.0/5.0
- Quality 3.0/5.0
- Value 5.0/5.0
- Ease of fitting 3.0/5.0
By Anonymous - worcester - Fix-It Beginner

Would not think ever again about going to the manufacture again for items they quoted £135. ordered from e spares and watched the video online and fitted no problem
Excellent
07 May 2013
- Overall Rating 5.0/5.0
- Quality 5.0/5.0
- Value 5.0/5.0
- Ease of fitting 5.0/5.0
By Davep - Cambs - Fix-It Expert

Followed the excellent video to fit. A few differences with mine but got there. Did test wash and no leak! However mains RCD tripped so had to order a heater element.
Great product
30 April 2013
- Overall Rating 5.0/5.0
- Quality 5.0/5.0
- Value 5.0/5.0
- Ease of fitting 5.0/5.0
By Greym - Edinburgh - Fix-It Beginner

This was the cheaper of the products listed for my Bosch washing machine. It was half the price of the brand one, and has been leak free since I installed it. The video link was excellent. The instructions were very easy to follow. Instead of a Phillip's screwdriver, I needed a torc head to remove all the screws. There was the odd instruction in the video that wasn't relevant to my machine, but it was easy to carry out the installation of the seal otherwise. I completed the whole procedure in a cramped kitchen in around 45 minutes. Followed by two leak proof loads soon after. Watch the video a number of times before starting. This was my very first attempt at such a procedure, it went really well and I'm a proud amateur plumber as a result.

Q i have a bosch washing mc with a split door seal which i have got to replace but since this has split i have been having intermittant problems with my mc operating ie. sometimes it wont spin or rinse do you think the leak from the seal has caused somethin 3 Answers
by goodsy - 20 February 2011
- A
  
  Hi Rory, I have also had a split door seal and this was then follwed by the machine not spinning, I have now replaced the door seal so what PCB is it I need to order and do you have videos of how to do that. The door seal video was perfect. Thanks. Also I can hear the relay on the control module pcb clicking on and off so do you think that would mean the pcb is ok and maybe the brushes are wet ?
  
  by Rich - 07 September 2011
- A
  
  Hi Rory, I have also had a split door seal and this was then follwed by the machine not spinning, I have now replaced the door seal so what PCB is it I need to order and do you have videos of how to do that. The door seal video was perfect. Thanks
  
  by Rich - 07 September 2011
- A
  
  Hi goodsy, the split seal will be leaking water, which could well have made its way towards electrical components inside the washing machine. I'd advise unplugging and not using again until you're sure everything's ok. It sounds as if the PCB may have been damaged by water leakage. I'd replace this, and replace the seal too.
  
  by Rory - 11 March 2011
Q fitting a door seal 3 Answers
is there any help to guide me to understand how to fit this item?

by mucuko - 17 November 2008
- A
  
  There is a video on this site, I watched and fitted my seal successfully.
  
  by jackums - 04 May 2010
- A
  
  The e-spares video is excellent - watch and listen carefully - you will need an extra pair of hands, just as the video explains.
  
  by borderer - 16 February 2010
- A
  
  Hi Mucuko, We do indeed have fitting instructions for the washing machine door seal. They can be found here: http://www.espares.co.uk/guides/washing-machines/g/12/38/replacing-door-seals.html
  
  by Samara - 18 November 2008
Q Is this seal designed for a washer/dryer or just a washing machine? Only I can't see tubing for the vent in the photo. 1 Answer
by B3nF - 29 July 2010
- A
  
  ther is no tubing for a vent so I reckon its just for a washing machine. hope that helps
  
  by charlie6 - 01 August 2010
Q I have an integrated washer dryer without the hint of a make, the internal diameter is 11'' and the outer 12.5''. Would this suit? 1 Answer
by Anonymous - 12 January 2009
- A
  
  Hi Watos I'm afraid that without a model number I can't help you. Maybe if you could have one last double check for it? For help finding your model number, refer to our handy guide: http://www.espares.co.uk/findingmodelnumbers.aspx
  
  by Rory - 21 January 2009
Q 2 different seals 1 Answer
There are 2 washing machine seals on site, the ES1019977 for £11.99 and the ES478741 thats priced @ £26.49 both claim to be for my washing machine type Bosch WFD2460. Can anyone tell me the difference in the two? thanks and Happy new Year!

by Pebs - 01 January 2009
- A
  
  Hi Pebs Both seals will fit your WFD2460 machine. We would recommend this one http://www.espares.co.uk/part/washing-machines/bosch/p/1085/856/0/0/478741/washing-machine-door-seal.html as it's a genuine Bosch part, whereas this one isn't. Happy new year!
  
  by Rory - 08 January 2009