Get The App From Play Store!

Skip to main content

Delivery times may be delayed during the Easter weekend

Delivery times may be delayed during the Easter weekend

Washing Machine Heater Element - 1200W Stock Number: ES215164

Genuine spare part for select models of Ariston, Hotpoint and Indesit washing machines

Read more

Manufactured by Ariston

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Washing Machine Heater Element - 1200W

If your washer has not been heating as well as it should, you may need to replace the dryer element. The heater element is a vital component of your washer dryer, as without it clothes take much longer to dry!

With this replacement element, you could ensure that the water remains at the correct temperature, and in doing so ensure that your clothes come out as clean as possible.

Specification:

  • Spiral
  • Wattage: 1200W
  • Single Tag Type
  • Full length of element: 130mm
  • Width of element: 70mm

Genuine spare part for select models of Ariston, Hotpoint and Indesit washing machines. 

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Ask a Question

9 Questions and 12 Answers

By SNAFU & FUBAR - Cornwall - 15 January 2014
  • I have just bought a washer/dryer as above and it came with a new sensor fitted, still flashed F13, i checked the fan, it seemed stiff, freed it off and now everything works great. By Ray - Bolton. - 19 July 2016
  • Chris from eSpares
    Chris at eSpares says...

    The error F13 is to indicate a dryer sensor (ntc) problem. Whilst it is possible that it could be another fault it is highly likely in this case to be Stock Number: ES663906 fitted on the right side of the dryer heater assembly on the top of the tub.

Answer this question
By Anonymous - LOCKERBIE - 06 February 2011
  • FIRSTY ISOLATE THE MACHINE The element on the WDD960 is located in the top of the machine, Undo the 2 screws securing the lid to the dryer and slide back and off, You will see the element housing, Undo the 7 smaller Torx screws and prise the top away (carefully as there are wires connected) next dissconnect the element cables (Pink & blue wires). Undo the 2 brass nuts and remove the element, Just reverse the proccess to refit. By leigh - bridgend - 19 December 2011
  • Rory from eSpares
    Rory at eSpares says...

    Hi there, the element is situated at the rear of the dryer. First you'll need to unscrew and remove all clips from the protruding cover on the back panel of the dryer. You should then see a metal fan as well as another cover. The element it situated underneath this cover. Remove it, and uncouple the old element from all the wires and fittings. Then reverse the process to fit the new one. Check out this video for help: http://www.espares.co.uk/advice/tumble-dryers/a/9/1284/how-to-fix-a-dryer-thats-not-heating-up-hotpo.html. The dryer in the video is a lot more basic than yours, but hopefully the process involved should help you understand your dryer a little better.

Answer this question
By hotpointwdl540pDAVE - HARROGATE - 13 January 2010
  • when mine packed in on our indisit washer/dryer nothing would work, everytime i switch it on it would trip the power. i tried too not us the element thinking i would be able too use the washer only but the machine went awire. so i think it does heat your water up as well, plus it was damp when i opened the section up. By Anonymous - stoke on trent - 27 February 2010
  • eSparesToby from eSpares
    eSparesToby at eSpares says...

    No, the heating element is the part that actually provides the heat. How much of it is controlled by the thermostat though. See our advice centre for more information.

Answer this question

Hi. Machine is working fine apart from not drying clothes in dryer cycle. When using dryer at weekend, main trip went on house electrics. reset trip and all ok other than not drying when tried since. Having read numerous articles, suggestions are it could be a problem with Dryer Heating element, Thermostat, Capacitor or PCB. Any suggestions on which to check first? Does tripping power suggest one ahead of another? There's no flashing lights or error messages showing. Any help much appreciated. Thanks

By confused again - Isle of Man, UK - 27 August 2013
  • Chris from eSpares
    Chris at eSpares says...

    Check the dryer element Stock Number: ES1562468. The resistance should be around sixty ohms.

Answer this question
By Richard - London - 05 October 2010
  • Before getting a new dryer element do a continuety test on the element if this fails then the element needs replacing ie- con test is being able to pass a small currant from one terminal to the other or use a test meter with this facility By Anonymous - - 13 October 2011
Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

Washing Machine Heater Element - 1200W

£21.09
(inc. VAT)
£21.09