Washers & Dryers
Vacuums & Floorcare
TV & Audio
Home & Lighting
In the unlikely event that you find this product cheaper elsewhere online, we'll refund the difference. Full details of the guarantee are available here
Stock Number: ES492697
Manufactured by Indesit
Available for immediate despatch
Read all reviews
Write a review
Click on your brand to see the model numbers this part fits.
If you've noticed the upper spray arm in your dishwasher is tilted, or won't turn properly, the fixing nut could be the cause. The seal over time, becomes worn, preventing the spray arm rotating as normal. This spare will have the arm locked securely in place, so no need to worry about it falling off.
Genuine spare for select Ariston, Creda, Hotpoint, Indesit and Philco dishwashers. Prior to ordering, please check the list of appliances to ensure this is the right part for you.
This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.
Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.
- Colwyn Bay
- Fix-It Beginner
Got it fast and fitted it easy and it fixed the problem....Thanks
- Professional Tradesperson
Part was delivered and fitted with ease, video of replacement nice touch although didnt need help as have repaired units in past. slightly over-priced for a plastic backnut but repaired in no time so worth the money.
- Professional Tradesperson
happy with purchase, well described and easy to fit thank you
I'm going to need one of these, cos the seal is shredded on mine, does this part just unscrew and screw back in? I've tried gently undoing mine, but it's not budging, didn't want to try too much force and break it!
- 08 February 2010
I had the same problem. In the end I took a pair of mole-grips to it and it came away easily. It's highly unlikely you@ll break it with a bit of force - they are tightly fitted to maintain pressure. Go for it.
- 25 May 2010
Get a pair of long nose pliers or mole grips and gently turn just to break up any verdigris around nut
- 11 May 2010
I have replaced this seal nut - mine was also very tight and I had to use a Mole Wrench to get it off. However it just unscrews, and the new one screws back on, as you would hope. I also replaced the spray arm as the seal on this was also perished, and now things are working perfectly.
- 18 April 2010
Yes it does unscrew and it is on tight, you will need a the help of a pair of grips just do it gently and it will unscrew nicely.
- 26 February 2010
Yes, just unscrew the old damaged one and screw in the new part. Don't worry about breaking the old seal 'cos you just bin it anyway. The new part is a complete replacement. If it is very tight you could try loosening it gently with a plumber's tap wrench. Access to to do this is easier if you take out the top dish rack. In most dishwashers you simply undo the clips at the front of the telescopic rails and withdraw the rack runners.
- 10 February 2010
- 15 February 2009
Yes you are definitely on the right track here. From your pictures I would say that is the faulty part to be replaced with new fixing nut with seal. That outlet feeds water into your top spray arm and the rubber seal needs to be a good tight fit to get best water pressure.
Hi Seanagreen, this is the very part you have photographed.
- 25 March 2009
- 03 August 2009
As i did not get reply for a week I took a chance an ordered one . This has now arrived and screws on perfectly. Waiting for wife to test it but should be fine so answer is yes it fits Proline washers
- 12 August 2009
Get special offers and the latest repair tips
Everything you ever wanted to
know about eSpares.
Calls are charged at 5p per min from BT landlines, other networks and mobiles may vary.
Copyright © eSpares LTD. All rights reserved 2004-2013.