Kitchen Appliances
Washers & Dryers
Vacuums & Floorcare
Garden
Cleaning Products
TV & Audio
Power & Lighting
Advice Centre
Overall Rating 4.9 out of 5
Dishwasher Door Interlocking Assembly
Fix it yourself and save money. This dishwasher door locking assembly will fit select Ariston, Creda, Hotpoint & Indesit dishwashers. Please check Models This Part Fits to make sure this part will fit your dishwasher.
Here's Matt to show you how to fix a broken dishwasher door lock by replacing this Dishwasher Door Interlocking assembly and the Cabinet Catch Plate:
This is Hotpoint spares reference: C00195887
Product Q&A (2 Questions : 14 Answers)
8 Answers
Does this include the spring
1 year, 6 months, 2 weeks ago | by neilcarpenter - Torquay
A: yes it does,my broken one lost spring and pin
3 months, 3 weeks ago | by ethelsouth33 - hampshire
A: Yes Neil this is a complete item ready to fit
4 months, 1 week ago | by Kenjtay - Devon
A: Yes
4 months, 2 weeks ago | by partsfitter - Northumberland
A: If you mean the coiled spring holding the latch in place then yes. When fitting look how the existing one fits into the "n" shaped groove and edit the extra plastic (gently) until the new one does the same.
5 months ago | by Hearnshaw - Bronte Country
A: Yes ,spring included
5 months ago | by gammon83 - Wirral
A: The switch assembly is the same as the one you remove it contains the housing, the spring and the power switch
6 months, 1 week ago | by emjo - Southport Merseyside
A: spring included and easy to fit
6 months, 2 weeks ago | by ksmakem - kingston upon thames
A: yes the spring is included
1 year, 6 months, 2 weeks ago | by jobsworth - Bolton
6 Answers
Do I have to remove the inner door panel to fit the lock?
Q: I have a DWF50 and am worried that removing this internal panel may damage the detergent release catch
1 year, 4 months, 4 weeks ago | by minilady - wolves
A: not sure on that model,on mine just took out top four screws and two either side.carefully pull top front and steel inner apart. WARNING mind fingers on edge of inner panel.sharp took chunk out of finger.
A: No inner panel stays in place only the top door plastics need removing. Top 8 screws will do the trick.
A: You shouldn't need to remove the internal panel to fit this. The screws along the inner edge should release the outer plasic cover only. Note the 2 different threads on the screws and make sure they go back in the same place.
A: The dishwasher that I repaired (haier) reqired removal of eight philips head screws to give enough acess to the switch then remove the two screws that hold the switch th the door inner, release and lift out the switch assembly remove the two power wires and refit the new switch in the reverse order. Remember to isolate the power before comensing work.
A: I didnt think so but after fitting my new lock something must have happened as it doesnt release anymore
A: When you remove all the panel screws its only the outercover on the door that comes off, you dont disturb any of the detergent release catch, hinges etc, the job takes about 15 min!
1 year, 4 months, 2 weeks ago | by ipol - Glasgow
Product Reviews
Prevents limescale build-up and improves the resulting shine of tableware.
Ensures sparkling cutlery and spotless tableware.
Get special offers and the latest repair tips
Everything you ever wanted to know about eSpares.
Copyright © eSpares LTD. All rights reserved 2004-2010