Fits the following models [?]

Click on your brand to see the model numbers this part fits.

• Bosch Dishwashers (6383)
• Neff Dishwashers (945)
• Siemens Dishwashers (40)

Description

More product images

Product Reviews

4.8/5.0 Rated 4.8 out of 5 (125111 customer ratings)

• Excellent value

  08 May 2013
  • Overall Rating 5.0/5.0
  • Quality 5.0/5.0
  • Value 5.0/5.0
  • Ease of fitting 5.0/5.0

  By Anonymous - Herts - Fix-It Beginner

  Very good customer service such a change to have a friendly voice to speak to. Product robust and easy to use, we have now purchased 3 in total, one each for the family

• Helpful video for easy repair

  08 May 2013
  • Overall Rating 5.0/5.0
  • Quality 5.0/5.0
  • Value 4.0/5.0
  • Ease of fitting 5.0/5.0

  By David - Croydon - Fix-It Beginner

  When the detergent dispenser broke on my old Bosch dishwasher I thought I was in for an expensive repair, or even needing to buy a new machine. A quick search on Google brought up a really helpful video - one of many by espares. They don't just stock the spares - they show you how to do the repair yourself. For a modest cost I was able to replace the broken spring, and with the help of the video it took only a few minutes to restore my dishwasher to life. The spare part was wonderfully economical, and arrived very quickly.

• Brilliant cost saver

  30 April 2013
  • Overall Rating 5.0/5.0
  • Quality 5.0/5.0
  • Value 5.0/5.0
  • Ease of fitting 5.0/5.0

  By Lew - Cambridgeshire - Fix-It Beginner

  I had anticipated at least a £60 bill when my dishwasher broke down. This little repair kit cost me less than a fiver and took less than 5minutes to install!

Ask & Answer

(4 Questions & 4 Answers)

• Q how do I fit the cam spindle 1 Answer

  Does the cam spindle just pull out and the new one push in as I am having trouble getting it out please can someone help

  by aberdonian - 28 November 2009

  • A

    split the the door front and cut the lug off the back of the spindle

    by matvan2007 - 29 March 2010

  

• Q Additional details on fitting please? 1 Answer

  It's not clear to me whether you can fit this parts kit without dismantling the dispenser unit. Can you just remove the sliding soap cover and access the existing parts beneath it (if so, then what's the trick to remove the soap cover?) or will I need to remove the front door trim in order to access the rear of the soap dispenser? Thanks!

  by Huck - 12 October 2009

  • A

    you need to split the door front from the inside by removing the security screws then cut the lug off the tripping device with side cutters replace with new one ,refit door front and then fit the spring to the dispenser then attach the draw front

    by matvan2007 - 29 March 2010

  

• Q Can I replace the cam spindle easily? 1 Answer

  I want to replace not only the spring but also the cam spindle itself since the interlocking of the lid (also being replaced) is effected by the sloping lugs on the lid and cam spindle arm and BOTH are worn, but it looks like the spindle has a locating spring groove at its lower end, which spring would be inside the main body. Is it possible to replace the spindle from the top just by pulling the old one out and pushing the new one in or does it need to be done by taking the whole dispenser unit to pieces ?

  by poppi - 21 September 2009

  • A

    Unfortunately we cannot give out technical advice. Please speak to the manufacturer directly or an engineer. Hopefully they will be able to help.

    by eSparesMalindi - 04 June 2010

  

• Q How do you fit this part? 1 Answer

  How do you fit this part?

  by Anonymous - 05 January 2009

  • A

    Push spring ends over the lugs on the cover and on the body where the original part was. The spring it self should be located towards the bottom of the soap dispencer. Then pull back the cover in the direction of the arrow without over streching the spring and it should click into place, you may have to jiggle it a little but don't force it.

    by Quien - 12 January 2009