Fits the following models [?]

Click on your brand to see the model numbers this part fits.

• AEG Cookers & Hobs (8)
• John Lewis Cooker & Hob (1)
• Zanussi Cookers & Hobs (9)
• Electrolux Cookers & Hobs (6)
• Tricity Bendix Cooker & Hob (1)

Description

How to replace an oven element

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

4.6/5.0 Rated 4.6 out of 5 (6058 customer ratings)

• Lasts just over a year..!!

  28 April 2013
  • Overall Rating 3.0/5.0
  • Quality 3.0/5.0
  • Value 3.0/5.0
  • Ease of fitting 4.0/5.0

  By msmith_123 - Milton Keynes - Fix-It Expert

  This is the second element I have purchased from espares. The previous one lasted 13 months. Let's hope that this one lasts longer.

• Oven stopped working

  10 April 2013
  • Overall Rating 5.0/5.0
  • Quality 5.0/5.0
  • Value 5.0/5.0
  • Ease of fitting 5.0/5.0

  By unhandyman - Fix-It Beginner

  Oven stopped working whilst cooking meal, so transferred item to top oven. Visited this site and used advice centre to diagnose the problem. Managed to locate the part, and placed an order. The order was managed swiftly and I was informed about delivery etc, . The item was delivered during time allotted, was packed well and apart from problem with the handle of the key set I had purchased (used Phillips screwdriver) took only couple of minutes to fit. Oven heated up straight away so problem fixed. Would certainly use this company again.

• Fantastic service

  30 March 2013
  • Overall Rating 5.0/5.0
  • Quality 5.0/5.0
  • Value 5.0/5.0
  • Ease of fitting 5.0/5.0

  By Cumbrian amateur - Horsham - Fix-It Beginner

  My oven element turned up next day and I fitted it within 10 minutes. Saved a small fortune. Video "how to do it" was incredibly helpful.

Ask & Answer

(1 Question & 1 Answer)

• Q Electrolux EOU43002X Not Heating up. 1 Answer

  My EOU43002X has tripped the electric a few times when you switch it on, then yesterday, It had been on for about 2 hours (cooking a roast) then all of a sudden the RCD tripped for all the sockets. I reset the RCD and everything looked fine, I went to check the Meat about 30 mins later and found that there was no heat in the Main oven. I'm assumming it's the element but wondered if it could be the thermostat instead. Any ideas would be good before I go buying lots of parts. The oven is only about 20 months old. The top oven/grill is still working fine.

  by Anonymous - 23 January 2011

  • A

    Hi there. It sounds very much like something in the element shorted, and therefore caused the fuse to trip. I'd say it's most likely that you'll need to replace the element.

    by Rory - 24 January 2011