Tricity Bendix 2500 Watt Circular Fan Oven Element for CSIE508X (STRATA)

Price:£22.25

UK Next Day Available
About delivery

We won't be beaten on price
Price Match Guarantee

Stock Number: ES507407

Manufactured by Electrolux
(This part fits select Tricity Bendix models)

In Stock
Available for immediate despatch

4.9/5.0 Rated 4.9 out of 5 (443 customer ratings)

Read all reviews Write a review

enlarge image

Fits the following models [?]

Click on your brand to see the model numbers this part fits.

Description

Cooker not heating up as normal? Get your buns baking again with this replacement circular main oven element from Electrolux.

2500 Watts
3 turn

Please note: This part is PNC number dependent for some models. Please contact us prior to ordering to ensure this is the correct part for your model.

Genuine spare part for select AEG, Blanco, Electra, Electrolux, Fagor, Firenzi, John Lewis, Moffat, Parkinson Cowan, Tricity Bendix and Zanussi cookers. Please see the list of compatible appliance models prior to purchase.

How to replace an oven element

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Delighted with purchase
15 May 2013
- Overall Rating 5.0/5.0
- Quality 5.0/5.0
- Value 5.0/5.0
- Ease of fitting 5.0/5.0
By Anonymous - omagh - Fix-It Beginner

Service and delivery of this item was excellent and 5 minutes fitted the part. Cooker working perfectly.
on the ball .
15 May 2013
- Overall Rating 4.0/5.0
- Quality 4.0/5.0
- Value 5.0/5.0
- Ease of fitting 5.0/5.0
By pedro - ireland - Fix-It Expert

Spot on , genuine part but element of lighter gauge than part I replaced.
Great product at a very good price
15 May 2013
- Overall Rating 5.0/5.0
- Quality 5.0/5.0
- Value 5.0/5.0
- Ease of fitting 5.0/5.0
By Anonymous - Peterborough - Fix-It Beginner

Very good value and with the help of the on line video showing how to fit an element, it was done and dusted in twenty minutes.

Q Will this stop my electrics tripping out when I turn the oven on? 5 Answers
Main oven has started tripping my electrics. Grill and top oven all ok. But as soon as the main oven is turned the power trips out.

by huxley - 29 December 2008
- A
  
  your element has shorted to earth replace element
  
  by handyman017 - 12 March 2010
- A
  
  its the main cooker element has blown,so triping out,i had exactly the same,fitted new one now better than before
  
  by Anonymous - 04 March 2010
- A
  
  yes it should do. when an element goes it melts together and it could cause a short circuit other causes could be loose wiring on element
  
  by Anonymous - 24 February 2010
- A
  
  It is possible that the main element has been damaged and it is causing an electrical short. Sometime the circular rigns fuse together and that may cause the short.
  
  by sigmosh - 23 February 2010
- A
  
  Hi Huxley Without actually seeing your oven, it is impossible to tell what is causing this problem. What I would advise is talking to your local cooker specialist and they should be able to diagnose the problem for you. And that's where we come in! With thousands of oven spares, we're bound to have the part for you.
  
  by Rory - 06 January 2009
Q My oven has a top oven and a bottom oven. Which one is this element for? (I need one for the bottom oven!) 4 Answers
Zanussi ZHQ575x

by nyoung02 - 29 April 2010
- A
  
  This element is for the BOTTOM OVEN of a Zanussi ZHQ575. To replace, gently unclip the thermostat from the top right hand corner of the back plate, unscrew the back plate and old element, pull the spade connectors from the element taking care that the wires don't spring back into the holes. Push the connectors on to the new element and reattach the element and backplate to the cooker. Clip the thermostat back in place. Should take no more than about half an hour.
  
  by unclekev - 16 February 2011
- A
  
  Please contact us with your full model details so that we can help you get the correct element for your appliance. Hopefully this link helps: http://www.espares.co.uk/findingmodelnumbers.aspx
  
  by eSparesMalindi - 18 June 2010
- A
  
  normally the top oven doesnt have a fan,the only element is for the grill.you can tell if that is working ,by turnig on and see it glowing ,therefore element would be in the bottom oven.but have you checked your thermostat! my advice is do the element first ,as these normally go first,they are very easy to fit ,and dont take much time at all. hope this helps.
  
  by bacardi1 - 15 June 2010
- A
  
  This is definitely the one! You just unscrew the plate at the back and the old element, then pull the crimped wires off (this is the hardest bit - I used pliers) then reassemble. If the lights all come on and it doesnt warm up then its definitely the element!
  
  by allegroequipe - 15 June 2010
Q It says I need top check the pnc number against the 'list of appliances' but where is the list of appliances? Could not find on the page,nor found with search..can you confirm which I need - details below... 1 Answer
John Lewis oven model JLBIDOS904 Product number 944171399 Serial number 64900009

by Nigel. - 08 February 2012
- A
  
  The element you need for that model and product number is our stock code ES1007939
  
  by Caitlin - 10 February 2012
Q Arrived in no time but can unscrew the front panel :-((( 1 Answer
I have tried all morning to unscrew the front panel to access the element I have tried WD40 and a lot of it but the screw are so stuck. Did you ever came across with this before? Do you have any suggestion? I really want to try to save some money and do it myself cheers

by Gianni - 29 October 2011
- A
  
  I had a similar issue but with just 1 screw on my front panel. It has corroded into the clip at the back and in my effort to unscrew it the cross head just rounded out. I used a dremil to cut the head of the screw into a flat so i could use a flat blade screw driver. After a bit of wigling about the screw came out and i replaced it with a new one.
  
  by damien - 20 December 2011
Q I've changed the main fan element and fan, still not working!? 1 Answer
I've changed the fan and element. The old element was open circuit, the new one had a reading of 22 ohms. So I believe the element went and took out the 32amp breaker in the fuse board. Is there something else that might have blown at the same time? or a reset device? Electrolux EOU6330X

by Robsparky99 - 01 October 2011
- A
  
  USE A TEST METER FOR TESTING THE POWER AT THE TERMINALS BE VERY CAREFUL THE WHOLE THING WILL BE LIVE.
  
  by JOHNNY WIRE - 21 January 2012