Vacuum Cleaner Guide - Replacing the Drive Belt
Replacing the Vacuum Cleaner Drive Belt
Safety First
Disconnect your vacuum cleaner from the power supply before performing this procedure.
| 1 |
Turn off and unplug the vacuum cleaner. Remove the front panel to give access to the motor spindle (this may unclip or have retaining screws). |
| 2 |
Unclip the drive belt from the motor spindle. Lift out the brushroll, clean the bearings, replace the belt and reassemble. |
Information provided is a guide only. eSpares accepts no liability for any problems occurring whilst attempting any advice shown. If in any doubt about fixing your appliance, always contact a qualified repairer.