eSpares - Spare Parts & Accessories for Appliances
Welcome to eSpares! (Sign In)
0845 230 6 230
Mon-Sat 9am-6pm
/\

basket Your Basket

Your basket is empty.

Pressure Washer Faults - Low Flow Rate and Chemical Injection

Low Pressure Washer Flow Rate & Chemical Injection

The following table outlines some possible causes and solutions:

Inlet filter blocked Check and clean inlet filter.
Internal tubes or valves could be worn Contact a qualified repairer.
Hose too long Replace with a shorter hose. To prevent pressure loss, hose should be no longer than 30m.


Information provided is a guide only. eSpares accepts no liability for any problems occurring whilst attempting any advice shown. If in any doubt about fixing your appliance, always contact a qualified repairer.





Copyright © eSpares LTD. All rights reserved 2001-2008