Having now refurbished the above dryer with parts provided by yourselves everything has gone to plan.The final task was to replace the damaged jockey wheel pulley and fit the belt.This proved to be a terrible task.To fit the original belt I had to move the drum closer to the motor but when fitted it was too slack and turning the motor did not turn the drum.I assumed the belt had stretched as it was cracked anyway so I have ordered a replacement.The jockey pulley does not have a tensioner so fitting a new belt would seem to be impossible.Most videos I have looked at the belt is connected from drum to motor others using a jockey pulley have a tensioner.Is there some clever way to fit this belt.