With a few simple steps, you can easily revive your fridge and get it back to its previous pristine glory.
Hi, I'm Mat from eSpares.
Today we will be looking at changing several parts on an AEG fridge freezer.
Safety first: Always remember to unplug the machine from the mains. This one has been disconnected already.
Also always buy the genuine spare parts for your model. For this, you will need all the model details. This can be located in a fridge in the bottom section where the salad container will be on a sticker or label. You can find all the spare parts you need on eSpares.co.uk
Right, let's start by changing the fridge bulb. This cover only has one screw to undo it - other machines may not have a cover at all, or the cover simply pops off. Let's unscrew the cover. You will see I am using an electric screwdriver to speed things up - this Black & Decker Screwdriver is available from eSpares.co.uk.
After removing the cover, unscrew the bulb, screw the new one back in its place, replace the cover and the screw like so, and we have light.
Next up, we'll replace the door bottle shelf. This is the lowest shelf inside the fridge door, which obviously gets a lot of heavy use with milk and water etc. This particular one simply lifts up like so, and the new one slides back into place.
Now the salad boxes or vegetable containers in fridges can easily be cracked as well - as you see this one has a large crack in it. And again find the correct salad box or container for your model, this again can be found at eSpares.co.uk. Simply remove the old one and put the new uncracked one in its place.
All the internal parts in a fridge can be replaced, including the shelves both in the door and in the main body of the appliance. The fridge seal can also be replaced but we will be covering that in a different video.
This fridge is now as good as new. Remember all these parts can be located on eSpares.co.uk along with parts for over 500 leading brands of home and garden appliances.
Thanks for watching.